1. Manuals
  2. Brands
  3. Vidikron Manuals
  4. Monitor
  5. PlasmaView VP-4200
  6. Owner's operating manual

Vidikron PlasmaView VP-4200 Owner's Operating Manual

High definition plasma displays
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
O W N E R ' S
O P E R A T I N G
M A N U A L
HIGH DEFINITION PLASMA DISPLAYS
Models VP-4200, VP-4200a, VP-5000,
VP-5000a, VP-6000 and VP-6000a
VERSION 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PlasmaView VP-4200 and is the answer not in the manual?

Questions and answers

Related Manuals for Vidikron PlasmaView VP-4200

Summary of Contents for Vidikron PlasmaView VP-4200

  • Page 1 O W N E R ’ S O P E R A T I N G M A N U A L HIGH DEFINITION PLASMA DISPLAYS Models VP-4200, VP-4200a, VP-5000, VP-5000a, VP-6000 and VP-6000a VERSION 1.0...

  • Page 3: Three Year Limited Warranty

    PLASMA GLASS PANEL: Vidikron will pay for service labor by a Vidikron Authorized Service Center when needed as a result of a manufacturing defect for a period of one (1) year from the effective date of delivery to the end user. In addition, Vidikron will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of one (1) year from the effective date of delivery to the end user.
  • Page 4 IMPORTANT – WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified.
  • Page 5 ADDITIONAL INFORMATION: To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this Limited Warranty, please call or write: VIDIKRON PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS _________________________________________________________ Model Purchased ____________________________________________________________________________________________________________...

  • Page 6: Safety Precautions

    Vidikron Dealer for a replacement cord. • Do not remove the cover of the plasma display for any reason. If any problems arise with the unit, please contact a Vidikron Dealer or Vidikron for service. Removing the covers will void the warranty.

  • Page 7: Table Of Contents

    Safety Precautions ... vi 1. Introduction ... 1 2. Controls and Functions ... 5 3. Installation ... 13 Vidikron PlasmaView Owner’s Operating Manual About This Manual ... 1 Target Audience... 1 If You Have Comments About This Manual..1 Textual and Graphic Conventions ...
  • Page 8 Cleaning the Display Panel Body and Remote Control...51 Cleaning the Screen...51 Cleaning the Vents ...51 Troubleshooting Tips ...51 RS-232 Connection and Port Configuration ...53 Serial Command Syntax ...53 Example...53 PlasmaView Specifications ...65 PlasmaView Dimensions ...67 Computer/Video Signal Compatibility ...70 viii Vidikron PlasmaView Owner’s Operating Manual...
  • Page 9 4-9. Viewing an Enlarged Area of the Display..........49 7-1. PlasmaView Model VP-4200 Dimensions (with Optional Table Stand) ....67 7-2.
  • Page 10 List of Figures Notes: Vidikron PlasmaView Owner’s Operating Manual...

  • Page 11: Introduction

    Vidikron has prepared this manual to help home theater installers and end users get the most out of the PlasmaView. Vidikron has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time.

  • Page 12: Using This Manual

    If you need... Information about obtaining service General information about the PlasmaView High-Definition Plasma Display Installation instructions First-time configuration instructions Advanced configuration instructions Troubleshooting tips Specifications for the PlasmaView High-Definition Plasma Display ... Turn to page: Vidikron PlasmaView Owner’s Operating Manual...

  • Page 13: Description, Features And Benefits

    • Screen Size (diagonal): 42 inches (Model VP-4200), 50 inches (Model VP-5000) or 60 inches (Model VP-6000) • 16:9 Native Resolution: 1024 x 768 (Model VP-4200) or 1365 x 768 (Models VP-5000 and VP-6000) • Multiple Aspect Ratios with IntelliWide™ Mode •...

  • Page 14: Parts List

    ➤ Parts List Your PlasmaView is shipped with the following items. If any items are missing or damaged, please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON. • PlasmaView High-Definition Plasma Display • AC Power Cord • Remote Control Unit and two (2), AA-size batteries •...

  • Page 15: Plasmaview Controls And Indicators

    Figure 2-1 shows the locations of the PlasmaView controls, indicators and connectors. INFO INPUT ASPECT RATIO STANDBY/ON MENU / SET Figure 2-1. PlasmaView Controls and Indicators Vidikron PlasmaView Owner’s Operating Manual (VP-6000) (VP-4200/VP-5000) – VOL + Operation panel on the underside of the main unit...
  • Page 16 10. LEFT ( ) / VOL – and RIGHT ( These decrease or increase the volume of sound from the speakers, or move the cursor left or right in the OSD mode. ) / VOL + Vidikron PlasmaView Owner’s Operating Manual...

  • Page 17: Connectors

    Figure 2-2, Figure 2-3 and Figure 2-4 show the rear-panel connector locations on the VP-4200 and VP-6000 respectively. RS-232 DVI VIDEO RS-232C COMBINATION Figure 2-2. PlasmaView Model VP-4200 Connector Panel Vidikron PlasmaView Owner’s Operating Manual COMPONENT OUTPUT INPUT1 INPUT2 INPUT1...

  • Page 18: Plasmaview Model Vp-5000 Connector Panel

    3 4 5 COMPONENT OUTPUT INPUT1 INPUT2 INPUT1 ANALOG RGB OUT ANALOG RGB IN (D-Sub) (D-Sub) AUDIO AUDIO AUDIO 3 4 5 Vidikron PlasmaView Owner’s Operating Manual INPUT1 INPUT2 ANALOG RGB IN DIGITAL RGB (D-Sub) (DVI-D) INPUT2 DIGITAL RGB (DVI-D)
  • Page 19 For connection of an external left speaker with an impedance of 6 ohms. 16. AC POWER INPUT Connect the PlasmaView to power here, using the included power cord. 17. MAIN POWER SWITCH Connects or disconnects the PlasmaView from the AC power source. Vidikron PlasmaView Owner’s Operating Manual Controls and Functions...

  • Page 20: Plasmaview Remote Control

    PIP SHIFT MUTE VOLUME P-OFF P-ON CLEAR Figure 2-5. PlasmaView Remote Control ASPECT RATIO Press this button repeatedly to select a display aspect ratio. INPUT SELECT Press one of these buttons to select an input. INFO Vidikron PlasmaView Owner’s Operating Manual...
  • Page 21 (refer to Screen Maint. on page 43). 19. P-ON (pin hole) Using a straightened paper clip or similar object, press this button to program a discrete IR code for powering on the PlasmaView into a control/automation system. Vidikron PlasmaView Owner’s Operating Manual Controls and Functions...
  • Page 22 Controls and Functions Notes: Vidikron PlasmaView Owner’s Operating Manual...

  • Page 23: Available Range Of The Remote Control

    The remote control can be used to control the PlasmaView within the ranges shown in Figure 3-1. Figure 3-1. Available Range of the Remote Control Vidikron PlasmaView Owner’s Operating Manual While pressing down lightly, slide in the direction of the arrow.
  • Page 24 • If the effective range of the remote control decreases, or it stops working, replace the batteries with new ones. • Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the plasma display and repeat the operation. Vidikron PlasmaView Owner’s Operating Manual...

  • Page 25: Quick Setup

    Display calibration: adjust the following for each input; save settings when finished: • Aspect ratio • Brightness • Contrast • Color level • Tint • Sharpness Vidikron PlasmaView Owner’s Operating Manual Quick Setup For Details, refer to page... 34 through 40 Installation...

  • Page 26: Installation Considerations

    Vidikron has found this plasma monitor to operate reliably at altitudes of up to 6000 MSL (mean sea level). At elevations higher than this, each panel may react differently, depending upon the altitude, air pressure, humidity and other meteorological factors.

  • Page 27: Ambient Light

    Figure 3-2. This allows heat to disperse, maintaining the proper operating temperature. Wall (2") Figure 3-2. Ventilation Requirements for Enclosure Mounting Vidikron PlasmaView Owner’s Operating Manual (2") Wall (2") Installation...

  • Page 28: Other Considerations

    • Protect the inside of the unit from liquids and small metal objects. In case of accident, unplug the power cord and have it serviced by an authorized Vidikron Service Center. • Do not hit or scratch the panel surface as this causes flaws on the surface of the screen.

  • Page 29: Connections To The Plasmaview

    VESA DDC-compatible computer communicate their setting requirements, allowing for quick and easy setup. In order for Plug and Play to work correctly, you must turn on the PlasmaView before you turn on the connected computer. Vidikron PlasmaView Owner’s Operating Manual Connections to the PlasmaView Installation...

  • Page 30: Analog Rgb Out (Input 1) Connection

    DVD player, DTV decoder or any other device with a DVI output. Connect such devices to INPUT 2 as shown in Figure 3-5. Use a 24-pin, DVI-D (digital only) cable. INPUT2 DIGITAL RGB (DVI-D) Figure 3-5. DVI-D (INPUT 2) Connection Vidikron PlasmaView Owner’s Operating Manual...

  • Page 31: Composite Or S-Video (Input 3) Connection

    You cannot switch from the Composite to the S-Video input (or vice versa) Note using the remote control. Press to switch between Composite and S-Video input AV component Figure 3-6. Composite or S-Video (INPUT 3) Connection Vidikron PlasmaView Owner’s Operating Manual Installation...

  • Page 32: Component Video (Input 4) Connection

    DVD player, DTV decoder or any other device with a DVI output (computer signals are not supported). Connect such devices to INPUT 5 as shown in Figure 3-8. Use a 24-pin, DVI-D (digital only) cable. DVI VIDEO COMPONENT Figure 3-8. DVI-D (INPUT 5) Connection Vidikron PlasmaView Owner’s Operating Manual...

  • Page 33: Audio Connections

    RCA plugs) at the other end; see Figure 3-10. INPUT 1 / INPUT 2 OUTPUT INPUT1 INPUT2 AUDIO AUDIO AUDIO INPUT 5 / INPUT 4 / INPUT 3 COMPONENT Figure 3-10. Connecting Audio Inputs Vidikron PlasmaView Owner’s Operating Manual Audio Cable (not supplied) Installation Audio Connections...

  • Page 34: Audio Output Connection

    Push tab to the open position, and insert the wire. Then, close tab firmly to secure the wire in place. Figure 3-12. Connecting Speakers (positive) and (negative) speaker wires to the EXT Vidikron PlasmaView Owner’s Operating Manual...

  • Page 35: Rs-232 Controller Connection

    Control SIG GND System NO CONNECTION 1, 4, 6, 7, 8, 9 DB-9 Female Figure 3-13. RS-232 Control System Connection Vidikron PlasmaView Owner’s Operating Manual RCV DATA PlasmaView XMT DATA RS-232 SIG GND 1, 4, 6, 7, 8, 9 DB-9 Male...
  • Page 36 Installation Notes: Vidikron PlasmaView Owner’s Operating Manual...

  • Page 37: Operation

    Option from the Main Menu. Press SET to select Language. Press the right- or left-arrow button ( press SET. The change takes effect immediately. Vidikron PlasmaView Owner’s Operating Manual Ferrite core Cable tie To AC IN As close as possible...

  • Page 38: Selecting An Input Source

    INPUT1 F H : 3 1 . 5 k H z F V : 6 0 . 0 H z 6 4 0 4 8 0 POL.H : NEGA POL.V : POSI PIX BY PIX Vidikron PlasmaView Owner’s Operating Manual...

  • Page 39: Changing The Aspect Ratio

    Monitor tab on the dialog box. Set the vertical frequency to 60Hz and click OK. 1. The native resolution of the VP-4200 is 1024 x 768; the native resolution Note of the VP-5000 and VP-6000 is 1365 x 768. Other horizontal or vertical resolutions may be scaled upward or downward to fit the display.
  • Page 40 16:9 display. Letterbox is best suited for viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen. IntelliWide scales a 4:3 image NON-linearly (more on the sides than in the center) to fit a 16:9 screen. Vidikron PlasmaView Owner’s Operating Manual...
  • Page 41 Active Image Area (14:9) PIX BY PIX 1280x720 Image within 1365x768 Display Vidikron PlasmaView Owner’s Operating Manual Description A 2.35:1 image is stretched anamorphically in both directions to fill a 16:9 display area. The 2.35:1 image is cropped on all sides.

  • Page 42: Using The On-Screen Menus

    The PlasmaView OSD menus are arranged hierarchically, as shown in Figure 4-2. Depending on the selected input source and signal characteristics, some menu options may not be available. ) to highlight it. ) to select the setting you want to change. Vidikron PlasmaView Owner’s Operating Manual...

  • Page 43: Plasmaview Osd Menu Structure

    2. When adjusting the Brightness (black level) for RGB and Component HD (480p/720p/1080i) signals, use the “User mode” Brightness control. For 480i and digital video sources, either Brightness control (“User” mode or Installer Adjust mode) can be used. Figure 4-2. PlasmaView OSD Menu Structure Vidikron PlasmaView Owner’s Operating Manual (Installer Adj.: 0 ... +255)

  • Page 44: Main Menu

    Vidikron video display devices. Accordingly, Vidikron recommends that setup and calibration be performed by an ISF-certified installation technician.

  • Page 45: Typical Gray Bar Pattern For Adjusting Contrast

    Brightness and contrast controls are interactive. A change to one may Note require a subtle change to the other in order to achieve the optimum setting. Vidikron PlasmaView Owner’s Operating Manual ) buttons, ) buttons, adjust Operation...

  • Page 46: Typical Color Bar Pattern For Adjusting Color Saturation And Tint

    To set the tint, select Tint from the Picture menu. While looking at the color bar pattern through a blue filter, adjust the tint level until the cyan and magenta color bars (on either side of the green bar) appear to be a single shade of blue. Vidikron PlasmaView Owner’s Operating Manual...

  • Page 47: Typical Test Pattern For Adjusting Sharpness

    To reset the white balance settings to the factory default values, select White Bal. Reset. Then, press to highlight YES and press SET. Select Return to exit the White Balance menu. Vidikron PlasmaView Owner’s Operating Manual R. GAIN G. GAIN B. GAIN R.

  • Page 48: Screen

    ) to shift the image up; use the ) to highlight H ) to shift the image to the right; use ) to highlight ) to highlight ) to highlight ) to increase the width; use the Vidikron PlasmaView Owner’s Operating Manual...

  • Page 49: Set-Up

    Use the left- or right-arrow buttons to select the desired amount of noise reduction, keeping in mind that higher settings (which reduce high frequencies) may also “soften” the image. Vidikron PlasmaView Owner’s Operating Manual ) to increase the height; use the...
  • Page 50 Brt. Enhance from the Set-Up menu and set it to ON. This reduces the brightness of the outer areas of the display by about 3% to 5%, relative to the center. For uniform brightness over the entire screen area, set Brt. Enhance to OFF. Vidikron PlasmaView Owner’s Operating Manual...

  • Page 51: Option

    “orbiting” image. This occurs according to the schedule you establish using the Screen Maint. menu in Installer Adjust mode (refer to Screen Maint. on page 43). Select Return to exit the Time/Date menu. Vidikron PlasmaView Owner’s Operating Manual INPUT POWER SELECTOR...
  • Page 52 – Auto Setup may not produce the desired results. If this occurs, set Auto Setup Mode to OFF and manually adjust the image position, frequency and phase; refer to Screen on page 38. Vidikron PlasmaView Owner’s Operating Manual...

  • Page 53: Option (Installer Adjust Mode)

    • Choose INVERSE to display an inverse image. • Choose ORBITER to display an “orbiting” image. Press SET. Repeat steps 1 through 8 as desired to create additional screen maintenance programs. Vidikron PlasmaView Owner’s Operating Manual INSTALLER ADJ. PICTURE SCREEN MAINT.
  • Page 54 For installations with only one PlasmaView, leave the ID Number set to 01. Do not change it unless specifically instructed to do so by Vidikron Technical Support. Fan Speed: Select Fan Speed from the Option Menu to control the operation of the PlasmaView’s cooling fan.
  • Page 55 • Underscan: Underscan causes the outer edge of the display to appear beyond the normal effective data area for a video signal. To use Underscan, select it from the Vidikron Pro menu and set it to ON. Then, exit the menu system and use the ASPECT RATIO remote control button to select Underscan mode.

  • Page 56: Picture Orientation

    Option menu. Then, press to highlight YES and press SET. This action resets ALL settings (except the display ID Number) to their default values, as set at the factory. This action is not undoable. Proceed with caution! Caution Vidikron PlasmaView Owner’s Operating Manual...

  • Page 57: Using Picture-In-Picture (Pip)

    The PIP sub-window appears beside the main image window. Press SPLIT again to display the sub-window superimposed on the main window. Press SPLIT again to turn PIP off. Vidikron PlasmaView Owner’s Operating Manual PIP FUNCTION SPLIT SUB INPUT SWAP PIP SHIFT...

  • Page 58: Selecting A Pip Source

    PIP FUNCTION SPLIT SUB INPUT SWAP PIP SHIFT MUTE VOLUME PIP FUNCTION SPLIT SUB INPUT SWAP PIP SHIFT MUTE VOLUME PIP FUNCTION SPLIT SUB INPUT SWAP PIP SHIFT MUTE VOLUME Vidikron PlasmaView Owner’s Operating Manual...

  • Page 59: Enlarging One Part Of The Screen

    2. The MAGNIFY function is cancelled if the input signal changes, or if you switch inputs or select PIP mode. Vidikron PlasmaView Owner’s Operating Manual ) to select a magnified image area to display. As you Magnification Level 3 (2x)
  • Page 60 Operation Notes: Vidikron PlasmaView Owner’s Operating Manual...

  • Page 61: Maintenance And Troubleshooting

    Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the PlasmaView. If the suggested solutions fail to resolve the problem or if you encounter an issue not described here, please contact your Vidikron dealer or Vidikron Technical Support.
  • Page 62 Remove any objects blocking the cooling vents on the PlasmaView and/or clean the vents. Cooling fan has • Immediately turn off malfunctioned. power, remove the power plug from its outlet, and consult your Vidikron dealer. Vidikron PlasmaView Owner’s Operating Manual Solution...

  • Page 63: Serial Communications

    (255): ID (2 bytes) 30 31 2A 2A <Ctrl> ASCII Vidikron PlasmaView Owner’s Operating Manual Command (3 bytes) Argument (3 bytes) 43 4E 54 32 35 35 Serial Communications...
  • Page 64 Sets the aspect ratio to PIX by PIX. – – Sets the aspect ratio to Standard 4:3. – – Sets the aspect ratio to ANAMORPHIC 16:9. – – Sets the aspect ratio to LETTERBOX. – – Sets the aspect ratio to INTELLIWIDE. Vidikron PlasmaView Owner’s Operating Manual...
  • Page 65 1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments. 2. These settings are not stored in memory. Vidikron PlasmaView Owner’s Operating Manual Value Range Description –...
  • Page 66 Swaps main and sub-screens in PIP 2-screen mode. – – Sets 2-screen operation to PoutP (side-by-side; small sub-screen on right). – – Sets 2-screen operation to 2 SCREEN (side-by-side, full height; main screen on left). Vidikron PlasmaView Owner’s Operating Manual...
  • Page 67 1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments. 2. These settings are not stored in memory. Vidikron PlasmaView Owner’s Operating Manual Value Range Description –...
  • Page 68 Sets the SIGNAL FORMAT to Type2. – – Sets the SIGNAL FORMAT to Type3. – – Sets the SIGNAL FORMAT to Type4. – – Sets the SIGNAL FORMAT to Type5. – – Sets the SIGNAL FORMAT to Type6. Vidikron PlasmaView Owner’s Operating Manual...
  • Page 69 1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments. 2. These settings are not stored in memory. Vidikron PlasmaView Owner’s Operating Manual Value Range Description –...
  • Page 70 Sets the GAMMA to 2.0. – – Sets the GAMMA to 2.1. – – Sets the GAMMA to 2.2. – – Sets the GAMMA to 2.3. – – Sets the GAMMA to 2.4. Adjusts red gain (highlight). Vidikron PlasmaView Owner’s Operating Manual...
  • Page 71 1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments. 2. These settings are not stored in memory. Vidikron PlasmaView Owner’s Operating Manual Value Range Description Adjusts red offset (lowlight).
  • Page 72 – Sets FRONT L.E.D. to ON. – – Sets OSD DISPLAY to OFF. – – Sets OSD DISPLAY to ON. – – Sets OSD SIZE to LARGE. – – Sets OSD SIZE to SMALL. Vidikron PlasmaView Owner’s Operating Manual 01IDC...
  • Page 73 1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments. 2. These settings are not stored in memory. Vidikron PlasmaView Owner’s Operating Manual Value Range Description –...
  • Page 74 Sets the adjustment value to the minimum value. – – Adds n to the adjustment value (n = 1 to 9). – – Adds 10 to the adjustment value. – – Sets the adjustment value to maximum. Vidikron PlasmaView Owner’s Operating Manual...

  • Page 75: Specifications

    Model VP-4200: 42 in. Model VP-5000: 50 in. Model VP-6000: 60 in. Model VP-4200: 36.28 x 20.29 in. (921.6 x 515.3 mm) Model VP-5000: 43.45 x 24.50 in. (1103.6 x 622.3 mm) Model VP-6000: 51.93 x 29.21 in. (1319.0 x 741.9 mm) 16:9 4:3, Letterbox, 16:9 Anamorphic, IntelliWide™...
  • Page 76 Weight (with Stand): Limited Warranty: Specifications are subject to change without notice. Model VP-4200: 83.0 lbs. (37.65 kg) Model VP-5000: 94.2 lbs. (42.73 kg) Model VP-6000: 150.5 lbs. (68.27 kg) Three (3) years parts and labor from the date of delivery to the end user (except for plasma glass panel).

  • Page 77: Plasmaview Dimensions

    Figure 7-1, Figure 7-2 and Figure 7-3 show the PlasmaView dimensions (all dimensions are in inches). 9.75 30.62 40.30 Figure 7-1. PlasmaView Model VP-4200 Dimensions (with Optional Table Stand) Vidikron PlasmaView Owner’s Operating Manual 6.87 12.37 27.73 33.23 Specifications PlasmaView Dimensions...

  • Page 78: Plasmaview Model Vp-5000 Dimensions (With Optional Table Stand)

    Specifications Figure 7-2. PlasmaView Model VP-5000 Dimensions (with Optional Table Stand) Vidikron PlasmaView Owner’s Operating Manual...

  • Page 79: Plasmaview Model Vp-6000 Dimensions (With Optional Table Stand)

    52.3 55.1 55.9 58.1 12.5 46.0 58.1 Figure 7-3. PlasmaView Model VP-6000 Dimensions (with Optional Table Stand) Vidikron PlasmaView Owner’s Operating Manual Specifications...

  • Page 80: Computer/Video Signal Compatibility

    √ I/O DATA √ – Apple Macintosh 16” √ √ √ √ √ √ √ √ √ – Apple Macintosh 19” √ √ √ √ I/O DATA √ √ √ √ √ √ √ √ Vidikron PlasmaView Owner’s Operating Manual...
  • Page 81 87.5 75.0 93.8 85.0 106.3 1680x1050 60.0 65.3 1920x1200 60.0 74.6 1920x1200RB 60.0 74.0 Vidikron PlasmaView Owner’s Operating Manual INPUT 1 INPUT 2 Remarks √ – Apple Macintosh 21” √ √ Sun Microsystems LO √ √ Sun Microsystems HI √...
  • Page 82 Specifications Notes: Vidikron PlasmaView Owner’s Operating Manual...
  • Page 84 RUMA-009815 rev. 06-07-07 v3.0 Vidikron 2900 Faber Street Union City, CA 94587 510-324-5900 Fax 510-324-5905 1-888-4-VIDIKRON www.vidikron.com SE RI A L NUM BE R...

This manual is also suitable for:

Plasmaview vp-5000aPlasmaview vp-4200aPlasmaview vp-6000Plasmaview vp-6000aPlasmaview vp-5000

Table of Contents