Table of Contents
Advertisement
Installer Setting
5. Installer Setting
If you want to operate Auxiliary Heater Relay Kit, you should have Wired or Wireless Remote Con-
troller below.
!
CAUTION
The installer setting mode is the mode to set the remote controller's detail function. If the installer
setting mode is incorrectly set, it may cause product failure, user's injury, or property damage. It
must be set by the installation specialist with the installation license, and if it is installed or
changed without installation license, all problems caused will be the responsibility of the installer,
and may void the LG warrenty.
• In the menu screen, press [<,>(left/right)] button to select the setting category, and press [∧(up)]
button for 3 seconds to enter the password input screen for the installer setting.
• Input the password and press [OK] button to move to the installer setting list.
※Installer setting password
Main screen → menu → setting → service → RMC version information → SW Version
Example) SW version : 1.00.1 a
In the above case, the password is 1001.
Note: Some categories of the installer setting menu may not be available depending on the product function
or the menu name may be different.
16 Auxiliary Heater Relay Kit
OK
OK
Hide quick links:
Advertisement
Table of Contents
