Chapter 9. Enclosure Packaging; Unpacking The Enclosure: 3-Piece Box With Packing - Assembly View - IBM Medium J11 Hardware Installation And Maintenance Manual

Chapter 9. Enclosure packaging

Information about unpacking the enclosure.
Supported packaging configurations are included for reference. Identify your packaging configuration
from the palletized enclosure ship kit assemblies shown below. Read the documentation provided in your
ship kit before unpacking, disposing of, or storing packing materials. See also "Preparing for installation"
on page 27
Figure 42. Unpacking the enclosure: 3-piece box with packing - assembly view
The figure below shows an illustrated parts catalog (IPC) representation of the enclosure master
container to complement the assembly view shown above.
Important: Disk drives in carriers (DDICs) are packaged separately from the Disk Enclosure, and are
available in different assortments (single, 12-pack, 24-pack). Do not populate disk slots with DDICs until
after the enclosure has been installed in the rack using a suitable mechanical lift. See also Safe handling
CAUTION and "Populating disk drive slots" on page 12.
©
Copyright IBM Corp. 2020, 75