Sony BRC-X400 Series Manual page 5

Manufacturer: Sony Imaging Products & Solutions Inc.
Model: BRC-X400/SRG-X series
Device Type: Camera
r_gain_up, r_gain_down
b_gain_reset
b_gain_up, b_gain_down
exposure_mode_auto,
exposure_mode_shutter,
exposure_mode_iris,
exposure_mode_manual
exposure_iris_reset
exposure_iris_up, exposure_iris_down
exposure_gain_reset
exposure_gain_up, exposure_gain_down
exposure_shutter_reset
exposure_shutter_up,
exposure_shutter_down
slow_shutter_on, slow_shutter_off
exposure_compensation_on,
exposure_compensation_off
exposure_compensation_reset
exposure_compensation_up,
exposure_compensation_down
backlight_on, backlight_off
visibility_enhancer_on,
visibility_enhancer_off
brightness_up, brightness_down
luminance_up, luminance_down
intensity_up, intensity_down
video_1, video_2, video_3, video_4,
video_5, video_6, video_7, video_8,
video_9, video_10, video_11, video_12,
video_13, video_14, video_15, video_16
©2013 Crestron Electronics, Inc.
15 Volvo Drive · Rockleigh, NJ 07647
800.237.2041 / 201.767.3400
D Increment/decrement red gain.
D Press to reset blue gain.
D Increment/decrement blue gain.
Press to set exposure mode to either auto, shutter priority, iris priority or manual.
D The other signals that are not last set will be changed to 0 via corresponding
feedback control signals.
D Press to reset IRIS value.
D Increment/decrement IRIS value
D Press to reset gain.
D Increment/decrement gain.
D Press to reset shutter speed.
D Increment/decrement shutter speed
D Press to set slow shutter mode on/off.
D Press to set exposure compensation to on/off.
D Press to reset exposure compensation value.
D Increment/decrement exposure compensation value.
D Press to set backlight compensation mode to on/off.
D Press to set visibility enhancer to on/off.
D Increment/decrement visibility enhancer brightness level.
D Increment/decrement visibility enhancer luminance level.
D Increment/decrement visibility enhancer compensation level.
Press to select the video format setting as follows. Please be sure that the software
D
version of the camera should be greater than or equal to v2.00 and that the
SYSTEM SELECT switch is set to 6. Please also be sure that recycling the power
For more information please contact our Crestron Application Market team at
applicationmarket@crestron.com. The information contained on this document is privileged
and confidential and for use by Crestron Authorized Dealers, CSP Members, A+ Partners
and Certified Integrated Partners only. Specifications subject to change without notice.
http://application.market.com