Setting Date & Time - Pull Out Crown; Three Hand Analog Quartz - Victorinox CHRONOGRAPHS Watch Basic Operating Instructions Manual

THREE HAND ANALOG QUARTZ

NOTE: Your watch will have either a "pull-out" or
"screw-down" crown. To determine this, gently try to
pull out the crown to position (2). If it does so, your
watch has a pull-out crown. If not, use the thumb and
forefinger to apply mild pressure on the crown while
rotating toward you to release it. If it does so, your
watch has a screw-down crown.
SETTING THE DATE & TIME - Pull Out Crown
A. Pull out the crown to position (2).
B. Rotate the crown toward you until the date
showing is the day before the desired setting.
C. Pull out the crown to position (3) and rotate
toward you. When midnight is reached, the
date will advance to the desired date. Continue
to turn the crown until the desired time is set. Remember, the date
advances at 12:00 midnight, not 12:00 noon.
D. Push in the crown, returning it to position (1). The date and time are
now set.
- 3 -
1 2 3