Setting Date & Time - Chrono Type Iii & Iv; Setting The Date (Quick Mode) - Victorinox CHRONOGRAPHS Watch Basic Operating Instructions Manual

SETTING THE DATE AND TIME
(CHRONO TYPE III & IV)

SETTING THE DATE (Quick Mode)

A. Pull out the crown to position (2) (the watch continues to run).
B. Turn the crown until the correct date appears.
C. Push the crown back into position (1).
Please note: The date can be changed during the date changing
between 9:00 PM and 12:00 PM; please note that the date must be set to
the date of the following day as in this case the automatic date chang-
ing does not occur at midnight.
- 9 -