Table of Contents
Advertisement
Solar Energy
PV-KBT 4 MC4 coupler plug
PV-KST 4 coupler socket
Figure 1: Multi-Contact MC4 type coupler system
2.3
Nameplate
The name plate is on the rear of the solar module. It
contains all information required to comply with DIN
EN 50380. It also includes information on the mod-
ule's output and other electrical data. The serial num-
ber is also featured as a Code 39 (3of9) barcode.
Figure 2: μm-Si plus EU1510 series nameplate
2.4
Intended use
μm-Si plus EU1510 series solar modules have been
very carefully built for use in ground-mounted and
rooftop photovoltaic systems. They are not intended
for any other use. No liability will be accepted for any
damage in cases of different use.
Improper applications or use particularly refers to:
Applications which focus light on the surface
of the module.
Applications where the solar modules must
comply with requirements for overhead glaz-
ing or toughened glass which can be walked
on or offers fall protection.
Note:
Bosch Solar Energy AG's warranty and guarantee be-
comes null and void if the module and module com-
ponents (couplers, cabling, junction box, label and
other parts) are tampered with in any way!
2.5
Normal conditions of use / envi-
ronmental conditions
Normal conditions of use / environmental condi-
tions
Module temperature
Humidity
Hail storm
Mechanical load-bearing
capacity vertical to the
module plane
5
-40 - +90°C
85 % (rh)
25 mm/ 23 m/s
2,400 Pa
Advertisement
Table of Contents
