Table of Contents
Advertisement
Quick Links
THANK YOU FOR YOUR PURCHASE!
It is the user's responsibility to ensure the safe and proper use of this product. StoreYourBoard, a Spire LLC company, is
not responsible for damages or injuries related to installation or use, including improper or inadequate mounting. Wear eye
protection during installation and check for electrical wiring in the wall before screwing or drilling into the wall. Not a toy;
not intended for children. Misuse of this product could result in serious injury or death.
WHAT'S INCLUDED
2 - Slotted Tracks
8 - Rack Arms
8 - Mounting Screws
SPACING
The XSR consists of 2 Tracks that can be mounted at any desired distance to fit the
length of your boards and gear. You must mount the XSR to the wall studs or another
solid surface. Typical studs in a home are spaced 16 inches apart. The most typical
mounting distances apart for the 2 Tracks are 32" and 48". Measure your boards and
gear, find the shortest required distance, and confirm the XSR will support it.
You can also adjust the vertical spacing of the Rack Arms after they've been mounted
into the Tracks.
XSR
Please read all instructions before installing this product
SAFETY INSTRUCTIONS & PRODUCT WARNINGS
WHAT YOU NEED
- Phillips Screw Driver
- Tape Measure or Ruler
- Pencil
- Stud Finder or Nail and Hammer
- Rubber Mallet of Hammer
- Level (optional)
- Page 1 -
Xtreme Storage Rack
Advertisement
Table of Contents
Related Manuals for StoreYourBoard xsr
Summary of Contents for StoreYourBoard xsr
- Page 1 SAFETY INSTRUCTIONS & PRODUCT WARNINGS It is the user’s responsibility to ensure the safe and proper use of this product. StoreYourBoard, a Spire LLC company, is not responsible for damages or injuries related to installation or use, including improper or inadequate mounting. Wear eye protection during installation and check for electrical wiring in the wall before screwing or drilling into the wall.
- Page 2 2. Mark Mounting Points. Place the first Track against the wall in your desired location. Decide the mounting height of the Track, keeping in mind the reach required to load and unload the XSR’s top rack level. Mark the bottom of the Track. Use a level to plumb the Track straight up and down.
Need help?
Do you have a question about the xsr and is the answer not in the manual?
Questions and answers