Page 2
[FEATUREs) PDX-a1 a high performance designed Ior the beginners and the professionals the same basic quality as the beet selling turntable, PDT-5000. FAST STARTS BY HIGH TORQUE Using high-torque direct motor, delivers l&g-cm start torque. The high-torque quick starts that enables the platter to reach 33-H rpm within 0.5 second.
Page 3
0 Adaptor pocket for 45rpm 0 Turntable 0 Center Spindle @ Spare Cartridge Stand 6) Balance Weight @I Anti-skating Control Knob &1 Arm Rest @I Tonearm (g> Pitch Control Knob @ Headshell 0 Detacheble Stylus Illuminator Jack @ Speed Select Button 69 START/STOP Button Button for Quartz...
ASSEMBLY AND SET-UP Installation of Turntable Flatter 1. By placing the turntable platter on the center spxndle, the platter adjusts to match the spindle by itself 2. Place the slip mat on the platter. 3. Extra care should be taken to avoid damaging magnet by dropping Installation...
Page 5
Adjustment af Stylus Pressure 1. Hold the balance weight with one hand as shown in the drawing (see fig. 5 1, and rotate only counter ring to bring the numeral “0” of the ring into alignment with the center line an the tonearm shaft (see fig.
STYLUS ILLUMINATOR (Detachable Mini Light) small light stylus illumination available as an optional extra. REMOTE CONTROL you wieh to control the START/STOP cage using external equipment like a foo~switch etc., input jack is provided at the left side of rear panel. QUARTZ LOCKED CONTROL AND PITCH ADJUSTMENT 1.
OPERATION LPlace the record on the turntable mat. 2.Prese the power switch button provided panel to turn “ON” position. %&move stylus protector detachable one. 4.Puah the start/stop button, then platter will start to turn. S.Move the tonearm position over the record. &Put it down to the record, and play wili begin.
Need help?
Do you have a question about the PDX-a1 and is the answer not in the manual?
Questions and answers