Bosch UniversalHedgeCut 50 Original Instructions Manual page 11

Use only extension cords, cables, leads, cable reels that
comply with EN 61242/IEC 61242 or IEC 60884-2-7.
If you want to use an extension cable when operating your
product, only the following cable dimensions should be
used:
– Nominal conductor area of 1.25 mm
– Maximum length 30 m for a Cord Extension Set or max-
imum length of 60 m for a Cable Reel with Residual Cur-
rent Device (RCD).
Note: If an extension cable is used it must be earthed and
connected through the plug to the earth cable of your supply
network in accordance with prescribed safety regulations.
WARNING! Inadequate extension cables can
be dangerous. Extension cable, plug and
socket must be of watertight construction
and intended for outdoor use.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products that are only sold in AUS and NZ: Use a resid-
u
ual current device (RCD) with a nominal residual current
of 30 mA or less.
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol Meaning
Wear protective gloves
Technical Data
Hedgecutter
Article number
Rated power input
No-load stroke speed min
Cutting length mm
Tooth opening mm
Bosch Power Tools
2 2
or 1.5 mm
Intended Use
The machine is intended for cutting and trimming hedges
and bushes in domestic use.
Product features (see figures A and
B)
The numbering of the product features refers to the illustra-
tion of the product on the graphics pages.
UniversalHedgeCut UniversalHedgeCut
50
3 600 HC0 500 3 600 HC0 700
W 480
-1
3400
500
26
Symbol Meaning
Wear safety glasses/goggles
Movement direction
Reaction direction
Weight
Switching On
Switching Off
Audible noise
Prohibited action
Accessories/Spare Parts
(1) Handle (insulated gripping surface)
(2) On/Off switch
(3) Lock-off button for On/Off switch
(4) Hand guard
(5) Blade
(6) Protection sleeve
A)
(7) Mains plug
(8) Extension cable
A) country specific
AdvancedHedgeCut
60
3 600 HC0 800
480
3400 3400
600
30
English | 11
AdvancedHedgeCut
65 70
3 600 HC0 900
500 500
3400
650 700
34 34
F 016 L81 787 | (16.08.2019)