1. Manuals
  2. Brands
  3. Century Heating Manuals
  4. Gas Heater
  5. G400
  6. Owner's manual

Century Heating G400 Owner's Manual

Vented gas fireplage heater
Hide thumbs

Advertisement

Table of Contents

OWNERS MANUAL
GENTURY HEATING
G400
VENTED GAS FIREPLAGE HEATER
WARNING: lf the information in this manual is
not followed exactly, a fire or explosion may
result causing property damage, personal iniury
or loss of life
- Do not store or use gasoline or other
ftammable vapors and liquids in the
vicinity of this or any other appliance-
-WHAT TO DO IF YOU SMELL GAS
. Do not try to light any aPPliance.
. Do not touch any electrical switch.
. Do not use any phone in your building.
. lmmediately call your gas supplier from
a neighbor's Phone. Follow the gas
supplier's instructions.
. lf ydu cannot reach your gjas supplier,
call the fire dePartment.
- INSTALLATION AND SERVIGE
MUST BE PERFORMED BV
A QUALIFIED INSTALLER,
SERVICE AGENCY OR
THE GAS SUPPLIER
"WARNTNG:" IMPROPER |NSTALUTTON, ADJTJSTMENT
ALTERNION, SERV,CE OR
MAINTENANCE OqN CNUSE NJURY OR PROPERTY DAMAGE. REFER TO THE OWNER'S
tNFoRMATtox
unuuAL pRovtDED wtrH THts AppLtANcE FoR Ass/srAwcE oR FoR
ADDITIONAL INFORMATION
CONSTJLT
A QIJALIFIED INSTALLER, SERVICE AGENCV
OR GAS SUPPLIER.
made in
CANADA
labriqu6
au CANAOA
NOTES: THIS IS A SEALED APPLIANCE AND THE GLASS RETAINER
MUST ALWAYS BE INSTALLED DURING OPERATION. NEVER OPERATE
iHEnpplnNcE wlTH BROKEN GLASS OR wlTH THE GLASS RETAINER
OFF. ANY LEAKAGE MAY CAUSE DANGEROUS AIR POLLUTION.
SAVE THIS MAI'IUAL
F()R FUTURE
REFERET'ICE
Part No. 519402 Rev.3 08/99
PRINTED IN CANAOA

Advertisement

Table of Contents
loading

Summary of Contents for Century Heating G400

  • Page 1 OR GAS SUPPLIER. made in CANADA labriqu6 au CANAOA Part No. 519402 Rev.3 08/99 G400 ALTERNION, SERV,CE OR A QIJALIFIED INSTALLER, SERVICE AGENCV CONSTJLT NOTES: THIS IS A SEALED APPLIANCE AND THE GLASS RETAINER MUST ALWAYS BE INSTALLED DURING OPERATION. NEVER OPERATE iHEnpplnNcE wlTH BROKEN GLASS OR wlTH THE GLASS RETAINER OFF.

  • Page 2: For Your Safety

    INSTALLATION AND OPERATION INSTHUCTIONS PLEAilEREADTHTIMANUALBEF1RETNiTALLINGAND|JStNGYoUnyENTEDGAS FIREPLACE HEATER FOR YOUB SAFETY Do not store or use gasoline or otner flammable vaPorc and liquids in the vlcinitY of this or any other appliance. FOR YOUR SAFETY lf you smell gas: 1. Do not try to light any applianc.e'. 2.
  • Page 3 1 (800) 668-5323 Monday to Friday, 9am to 5pm Eastern Standard time...
  • Page 4 f f i n s a n d g u i d e | i n e s i n t h i s m a n u a | . F a i | u r e t o | o | | o w t h e s e i n s t r u c t i o n s exactly may resuliifri?i "i gas train Parts list DercrlPtlon...
  • Page 5 manual control wlth pressure regulator Filter Manual shut-off Flame Failure Device TECHNTCAL SPEC|FICAT|ONS Inlets (2) Outlets (2) Maximum Working Pressure Working Temperature (oF) Thermostat Range fF)-- Calibration Temperature (oF) Max. Regulated Capacily Min. Regulated Capacity- Pilot Flow Rate - 2.5 Ft./hr. at 0.S" Pressure Drop Weight (') Based on 1,000 BTU/Ff :0.64 s.g.gas at 1.00"W.C.
  • Page 6 (sEE PAGE 6) Dorcdptlon Part llumbcr Koy# Stove Back Weld't S41217 Door AssemblY ' Gold S31189 Door AssemblY ' Black S31190 Door Weld't' Gold 541222 DoorWeld't' Black 541224 S 1 O O 1 4 G l a s s ' H i T e m P 1/8"...
  • Page 7 ANY SAFETY SCREEN OR GUARD REMOVED FOR SERVICING AN APPLIANCE MUST BE REPLACED PRIOR TO OPERATING THE APPLIANCE. ''WARNING'' DO NOT OPERATE THE APPLIANCE WITH THE GLASS FRONT REMOVED, CRACKED OR BROKEN. REPLACEMENT OFTHE GLASS SHOUT D BE DONE BY A LICENSED OR QUALIFIED SERVICE PERSON.

  • Page 8: Variable Speed Control

    FIG. A --------> fan lnstallatlon instructlons 1. Remove fan from carton. 2. Using four screws provided attach fan.to stove as shown above' Be sure to install rubber gromets as shown above' 3. Speed control switch is to be inserted into pedestal, as shown, and tighten until secure.

  • Page 9: Gas Specifications

    CIOTHING OR OTHER FLAMMABLE MATER'AIS SHOULD NOT BE PLACED O'V OR NEAR THE APPLIANCE. installation instructions GAS SPECIFICATIONS llatural Gas Manifold Pressure 3.5" W.C. Minimum Inlet Pressure' 5.0" w.c. Maximum lnlet Pressure 10.5" W.C. Fl'U Input Rating (Max.) 30,000 BTU Input Rating (Min.) 23,500 'For purpose ot lnput Mustment.

  • Page 10: Temperature Range

    temperature range The thermostat (#1 see berow drawing) is caribrated and set at gas flow Maximum flow rate can be checked by cooling the thermostat bulb the knob (#4 see below drawing) counter clockwise to the Hl Minimum flow rate can be checked by cooling the thermostatic bulb the knob (#4 see berow drawing) counter crockwise $;rt This flow rate is determined by the o.E.M.
  • Page 11 yentlng Instaltailon guldeflnes PROPER INSTALLATION OF GAS VENTING IS AN IMPORTANT SAFETY AND APPLIANCE PERFOFMANCE IF YOU ARE NOT QUALIFIED, DO NOT ATTEMPT INSTALLATIONS GAS APPLIANCES, PIPTNG OR VENTING. flsted vents A listed gas vent is a factory made and listed system designed, and instalted exctusively toi iemoving p.Oj"tJoi combustion, excess airi and diiution air reiutting tro;...
  • Page 12 WARN'NG! Installations should only be made by qualilied persons who are famillar wlth the safety procedures required for the Installation ol the Product' who arc equipped wlth the proper iools and testing instruments, and who have athleved Proper.certificatlon of licensing. Installations made be unqualiiied persons can result In hazards sublectlng the unqualified peron to the risk of injury or electrlcat shock whlch can be serious or even fatal not only io the Installer, but also to persons being serued by the equlpment.

  • Page 13: Installation

    venting installation guidelines WARNING! Installations should only be made by qualified persons who are familiar with procedures required for the installation of the product, who tools and testing instruments, and who have achieved proper certificaiion of Installations made be unqualified persons can result in-hazards sublecting the person to the risk of lnirty or electrical shock which can be serious or evin latat not only to the instafler, but also to persons being served by the equipment.
  • Page 14 1. Periodic visual checks of the pilot should be conducted lo ensure that the flame is present excgpt when the valve control knob is in the "OFF" position. - GAS CONTROL 3. All component parts are available directly through the manufacturer.
  • Page 15 IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERIY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. This appliance has a piezo ignition pilot. When lighting the pilot, follow these instructions exacily. BEFORE LIGHTING smellatlaround the apptiance area for gas.
  • Page 16 T}Io)UBLE With proper instailation and maintenance, your new Gas Fireplace should provide yeaq of troubl+ tree dervice. lf you do experience a problem, refer to the trouble shooting- guide shown below. This guide will assiit a qualiiied servic'e persion in the diagnosis of problems and the correctlve action to be taken.
  • Page 17 TFOUBLE sYlrPTOm lll. Frequent pilot outage problem. lV. Pilot and maln burner go out white belng in operation. V. Glass soots. Vl. Flame burns blue and lifts otl burner. - G 4 ( ' ( ' - SHOOTING POSSTBLE GAUSE A.
  • Page 18 \'ENTTNG TROUBLE Most venting problems are caused by incorrect vent sizing, improper installation, or inadequate air supply. A preliminary check for a field problem might include: . Using a draft meter to determine if venting system draft meets manufacturer's specifica- tions.

  • Page 19: Installation Instructions

    DECORATIUE Supplied with your G400 gas unit is a decorative collar you may wish to use to enable you to give your unit that "woodstove" look by hiding your venting inside regular 6" stove pipe. I NSTALLATION I NSTRUCTIONS Center collar on vent opening and mark holes (3 places).
  • Page 20 CFM Corporation...

Table of Contents