Advanced Settings
Available on th
e Advanced menu, this screen contains a number of rarely-used settings
intended for use in
special circumstances.
The settings on
th screen are organized into 3 categories
is
Access Point
3G Modem
Router
System
Access Point Settings
•
SSID broadcast enable - Normally, this should be left enabled so that MiFi 2200 will
appear in the list of "Available Wireless Networks" on your computer or portable device.
If disabled, MiFi 2200 will not be listed, and its details must be entered manually.
3G Modem
•
Auto-connect enable – Normally, this should be left enabled so that MiFi 2200 automatically
connects to Mobile Broadband/NationalAccess. If disabled, MiFi 2200 will connect to Mobile
Broadband/NationalAccess only after user clicks Connect button on home screen.
Router Settings
•
DHCP Server enable - The DHCP Server automatically allocates an IP address to each
of your wireless clients. Normally, this should be enabled. If disabled, each Wireless
client should have a fixed IP address, set on the client.
•
VPN Pass-through enable - This feature allows VPN clients to connect through MiFi
2200 to remote VPN Servers. Normally, this option should be left enabled.
System Settings
•
System log enable - Enable or disable the system log as desired. The system log can be
viewed on the "Diagnostics" screen.
•
Language - This option sets the language used in this interface. Select the desired
option.
•
Date/Time – You can use either American or European format. Select the desired
option.
33