①
Setting screw for horizontal alignment
②
Setting screw for vertical alignment
Procedure
Note
Fix the position of the rotating bracket with the setting screws loosened.
1. Release the two setting screws
2. Position the antenna as required.
3. First tighten the setting screw
The tightening torque is 3.5 Nm.
4. Then tighten the setting screw
The tightening torque is 3.5 Nm.
Antenna ANT795-6DC
A5E03484065-04, 09/2017
①
②
and
.
②
for the vertical alignment.
①
for the horizontal alignment.
Installation
45