Table of Contents
Advertisement
Cooking without Con@ctivity
(Manual mode)
The cooker hood can be operated
manually if:
– The Con@ctivity function is not activ-
ated.
– You have temporarily deactivated the
Con@ctivity function (see "Operation
(Manual operation)" – "Leaving auto-
matic mode temporarily").
You can operate the cooker hood
manually via the Miele@mobile app
exclusively.
You must have Miele@home set up in
order to use the Miele@mobile app
(see "Before using for the first time" –
"Setting up Miele@home").
In exceptional cases, the cooker hood
can be operated using the control
panel on the lower side, e.g. if the WiFi
connection has been interrupted. For
this, remove the grease filter.
Switching the fan on and off
Switch the fan on as soon as you start
cooking. This is to ensure that vapours
are captured right from the start.
The fan will start running at power level
2. The deflector plate will open.
Selecting the power level
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, select Booster
setting B.
Operation (Manual mode)
Reducing power down from the
Booster setting
If power management is activated (de-
fault setting), the fan automatically
switches back to level 3 after 5 minutes.
Selecting the run-on time
It is advisable to run the fan for a few
minutes after cooking has finished. This
helps to remove any lingering vapours
and odours from the air.
It also reduces the risk of residues ac-
cumulating in the cooker hood and any
resultant odours.
The run-on function enables the fan to
continue running for a pre-determined
time before switching itself off automat-
ically.
Dimming/switching the hob
lighting on/off
The hob lighting can be switched on
and off and dimmed independently of
the fan.
25
Advertisement
Table of Contents
