Download Print this page

Controls & Connector - ARTHUR HOLM ERT 30 User Manual

Ip to rs422 interface control
Hide thumbs

Advertisement

User manual
Controls & Connector
Controls
ETHERNET: RJ45 network connector. Connect the ERT to your local network, to open the 2002 port and send AHnet com-
mands to the units connected to the RS422 ports (AHnet1 and AHnet2)
SERVICE: USBA connector used only to firmware upgrade
AHnet1: RJ45 RS422 port. Connect the Arthur Holm or Albiral units to control using AHnet commands
AHnet2: RJ45 RS422 port. Connect the Arthur Holm or Albiral units to control using AHnet commands
Note: ERT-30 has only one AHNet RS422 port connector. With and ERT-30 you can control up to 30 devices, and with an ERT-
60, you can control up to 60 devices using the two AHNet port connectors (30 devices connected on each port)
9

Advertisement

loading

  Also See for ARTHUR HOLM ERT 30

  Related Products for ARTHUR HOLM ERT 30

This manual is also suitable for:

Ert 60