Add Shelf Capacity Licenses; Add Storage License - Dell EMC Data Domain DS60 Hardware Manual

Post-Installation Tasks

Add shelf capacity licenses

Add storage license

# license add xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx
Added "xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx" : CAPACITY-ACTIVE feature for 32.7 TiB
capacity DS60
Data Domain DS60 Expansion Shelf Hardware Guide
92
Table 17 Disk pack layout
13
10
7
4
1
Table 18 on page 92 shows the layout of all 60 disks within the DS60 shelf, and how
the disks are divided into the four disk packs.
Table 18 DS60 disk layout
Disk pack 1 Disk pack 2
49 50 51 52
37 38 39 40
25 26 27 28
13 14 15 16
1 2 3 4
Apply appropriate shelf capacity licenses for all shelves as needed.
Each storage shelf requires one or more shelf capacity license depending on the pack/
packs (DD OS software manages the drives in packs of 15). This license is specific for
either active or Extended Retention tier usage of the shelf.
Note
DD6300, DD6800 and DD9300, and DD9800 systems can only be licensed through the
Electronic Licensing and Management System (ELMS). Refer to the applicable Data
Domain Operating System Release Notes for the most up-to-date information on
product features, software updates, software compatibility guides, and information
about Data Domain products, licensing, and service.
An Expanded-Storage license is required when expanding the capacity of the active
tier beyond the entry capacity. Please check the Data Domain Operating System
Administration Guide for the DD OS you are using to determine if the Expanded-
Storage license is required.
Procedure
1. To add the first shelf capacity license, enter the license add command
followed by one license key, separated with a space. For example:
14
11
8
5
2
Disk pack 3
53 54 55 56
41 42 43 44
29 30 31 32
17 18 19 20
5 6 7 8
15
12
9
6
3
Disk pack 4
57 58 59 60
45 46 47 48
33 34 35 36
21 22 23 24
9 10 11 12