Part 3 Set Up - Maxwell AutoAnchor 730 Owner's Manual

PART 3 SET UP

3.1 USING THE AUTOANCHOR BUTTONS
Hold for 2 seconds to disable the lock.
Hold for 1 second to toggle between modes eg windlass to thruster.
Control the windlass.
Hold for 6 seconds to turn off.
3.1.2 LED INDICATORS
System (Red)
connected when the windlass is turning.
Network (Green)
Comms (Yellow)
Note:
3.2 RESETTING FACTORY DEFAULTS - Clears all settings
the base station has performed a complete factory reset and all settings have reverted to
16