SAFETY PRECAUTIONS FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3
SAFETY PRECAUTIONS On Safety As the laser beam used in this compact disc player could be harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. • Do not put any foreign objects in the disc compartment. If you do so, the laser beam interlock may be defeated allowing the laser to remain on when the lid is opened.
SYSTEM CONNECTIONS Speaker Connections Connect the right speaker to the R terminal and the left speaker to the L terminal. NOTE: Connecting speakers other than the speakers supplied with the unit may damage the unit. RIGHT SPEAKER Using the AC Adapter Using an AC adapter other than the one supplied with the unit may damage the unit.
REMOTE CONTROL Using the Remote Control Correctly • Point the remote control at the REMOTE SENSOR located on the unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. •...
Setting the clock can only be done in STANDBY mode. • If the unit is plugged in with the supplied AC adapter and the unit is in standby mode, the standby indicator illuminates. 1. Press and hold the PROG/MEM/ 2. Press the button to adjust the desired hours then press the PROG/MEM/ button once to confirm.
LISTENING TO THE RADIO 1. Press the STANDBY/ON button to turn the unit on. 2. Press the FUNCTION button to radio mode. 3. Press the BAND/ STOP button to select a band (AM/FM). 4. Press the button to tune in to a station. •...
Skipping to Another Track • Press either the button according to the desired direction. Press the button to skip to the start of the current track or skip to previous tracks. Press the to skip to the beginning of the next track. Locating a Particular Point on a Track •...
LISTENING TO YOUR iPod iPod Compatibility The CD Micro System works with iPod mini (4GB, 6GB), iPod nano (1st generation) - 1GB, 2GB, 4GB, iPod 5th generation (video) - 30GB, 60GB, 80GB, iPod nano (2nd generation) - 2GB, 4GB, 8GB, iPod classic (80GB, 160GB), iPod nano 3rd generation (video) - 4GB, 8GB and iPod touch (8GB, 16GB).
Page 11
LISTENING TO YOUR iPod Pausing Playback • Press the PLAY/PAUSE button. • To resume playback, press the Skipping to a Another Track • Press either the button according to the desired direction. • Press the button to skip to the beginning of the current track or previous track. Press the to skip to the beginning of the next track.
The timer function will turn the unit on at a preset time. To Set Timer 1. In standby mode, press and hold the TIMER button on the remote control until the TIMER indicator blinks. 2. Press and hold the PROG/MEM/ 3.
TROUBLESHOOTING GUIDE PROBLEMS System does not turn on Disc in place but unit won’t play Disc skips RADIO Poor FM reception Poor AM reception iPod iPod does not dock properly or does not install properly. iPod does not respond to the speaker system.
Packaging and Shipping Instruction When you send the product to the VENTURER service facility you must use the original carton box and packing material or an equivalent as designated by VENTURER. Your Responsibility (1) You must retain the original sale receipt to provide proof of purchase.
Page 15
The time within action must be commenced to enforce any obligation of VENTURER arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date of purchase. This limitation does not apply to implied warranties arising under state law.
Need help?
Do you have a question about the CD7106VI and is the answer not in the manual?
Questions and answers