Philips Sonicare DiamondClean 9000 Manual page 20

20
English
3 Place the handle on the charging stand or in the charging glass.
4 The charger will charge your toothbrush until it is fully charged.
The handle is charging when the battery indication is blinking white.
When the handle is fully charged, the battery indication illuminates
white for 30 seconds and then turns off.
Note: Your handle comes pre-charged for first use. After first use,
charge for at least 24 hours.
Charging with the travel case*
*Note: The charging travel case may not be included depending on
the model purchased.
1 Take the USB cable from the bottom of the charging travel case.
2 Connect the charging travel case to 5V DC input power either from:
- The USB adapter provided
- a UL-listed or certified to ANSI/UL 60950-1 personal
computer's standard USB connector or,
- a UL-listed or certified to ANSI/UL 60950-1 LPS power supply
with USB output port or,