Specifications - Sony DCR-VX2200E Service Manual

Hide thumbs

Advertisement

Table of Contents
These specifications are extracted from instruction manual of
DCR-VX2200E.
System
Video recording system
2 rotary heads, Helical scanning system
Still image recording system
Exif Ver. 2.2*
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits
Fs32kHz (stereo1, stereo2)
Quantization: 16 bits
Fs48kHz (stereo)
Video signal
PAL color, CCIR standards
Usable cassette
Mini DV cassette with the
printed
Tape speed
SP: Approx. 18.831 mm/s
LP: Approx. 12.568 mm/s
Recording/playback time
SP: 60 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
Fast forward/rewind time
Approx. 2 min 40 s (using a DVM60
cassette and rechargeable battery pack)
Approx. 1 min 45 s (using a DVM60
cassette and AC Adaptor)
Viewfinder
Electric viewfinder (color)
Image device
6.0 mm (1/3 type) 3CMOS sensor
Recording Pixels (DV16:9 still
recording):
Max. 1.20 Mega (1 440 × 810) pixels**
Gross: Approx. 1 120 000 pixels
Effective (movie, 4:3):
Approx. 778 000 pixels
Effective (movie, 16:9):
Approx. 1 037 000 pixels
Effective (still, 4:3):
Approx. 778 000 pixels
Effective (still, 16:9):
Approx. 1 037 000 pixels
Lens
G Lens
20 × (Optical), Approx. 30 × (Digital,
when [D.EXTENDER] is set to [ON])
Focal length:
f= 4.1 - 82.0 mm (3/16 - 3 1/4 in.)
When converted to a 35 mm still
camera
36.1 - 722 mm (1 7/16 - 28 1/2 in.)
(4:3),
29.5 - 590 mm (1 3/16 - 23 1/4 in.)
(16:9)
F1.6 - 3.4
Filter diameter: 72 mm (2 7/8 in.)
Color temperature
Automatically
(one push) A/B
[INDOOR] (3 200 K)
[OUTDOOR] (5 800 K)
Minimum illumination
1.5 lx (lux) (Fixed Shutter Speed 1/25,
auto gain, auto iris) (F 1.6)
DCR-VX2200E_L2

SPECIFICATIONS

*
"Exif" is a file format for still images,
established by the JEITA (Japan
Electronics and Information Technology
Industries Association). Files in this
format can have additional information
such as your camcorder's setting
information at the time of recording.
** The unique pixel array of Sony's
ClearVid CMOS sensor and image
processing system (Enhanced Imaging
Processor) allows for still image
resolution equivalent to the sizes
described.
mark
Output connectors
A/V Remote Connector
10-pin connector
When A/V connecting cable is
connected
Video signal: 1 Vp-p, 75
Luminance signal: 1 Vp-p, 75
Chrominance signal: 0.3 Vp-p (burst
signal), 75
Audio signal: 327 mV (at load
impedance 47 k (kilohms)), Output
impedance with less than 2.2 k
(kilohms)
i (headphones) jack
Stereo-minijack (Ø 3.5 mm)
Input/Output connectors
LANC
jack
Stereo mini-minijack (Ø 2.5 mm)
DV jack
i.LINK interface (IEEE 1394, 4-pin
connector S100)
MIC (PLUG IN POWER) jack
Stereo-minijack (Ø 3.5 mm)
LCD screen
Picture
8.0 cm (3.2 type, aspect ratio 16:9)
Total dot number
921 600 (1 920 × 480)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption
During camera recording using the
viewfinder with normal brightness:
5.8 W
During camera recording using the
LCD with normal brightness:
6.0 W
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (approx.)
169 × 178 × 349 mm
(6 3/4 × 7 1/8 × 13 3/4 in.) (w/h/d)
including the projecting parts except for
the grip belt
Mass (approx.)
2.1 kg (4 lb 10 oz) including the lens
hood with lens cover
(ohms)
(ohms)
(ohms)
— 2 —
AC Adaptor AC-L100/AC-L100C
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Current consumption
0.35 A - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V***
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (approx.)
48 × 29 × 81 mm
(1 15/16 × 13/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
170 g (6.0 oz) excluding the power cord
(mains lead)
*** See the label on the AC Adaptor for other
specifications.
Design and specifications are subject to change
without notice.

Advertisement

Table of Contents
loading

  Also See for Sony DCR-VX2200E

  Related Manuals for Sony DCR-VX2200E

This manual is also suitable for:

Rmt-831