Blade Installation - Toshiba F-LYA20HKG Owner's Manual

Align the blade with the motor shaft and
put it on, and the side with warning label
of the blade faces outward; Rotate the
spinner counterclockwise to lock the
blade.
First, nd the front and rear
grill clamping, and stabilize
the front grill to the rear grill
buckles;
Insert the clamping

Blade Installation

Front Grill Installation
Press the mesh enclosure by
both hands in sequence, and
when you hear a ''click'', the
installation is in place.
Power Up
After installation, plug on the machine. After
hearing the "drop", the fan is powered on
successfully.
Concave and convex clamping
Then fasten the net buckle at the bottom
of the front grill, insert the mesh enclosure
screw into the hole of the net buckle, and
tighten it with a screwdriver.
Note: 1. The mesh enclosure screw is xed at the
rear grill clamping, and the user needs to
unscrew the screw and then install it.
2. Be sure to install the net cover when running.
4
Lock nut of blade
(Anti-clockwise
direction)