Removing And Fitting The Appliance Door - Siemens HG72G.1 M Series Instructions For Installation And Use Manual

Area Cleaning agents
Door panels ã=
The lower edge of the door may have
sharp edges. Clean the door and glass
panels with care.
Glass cleaner:
Clean with a soft cloth.
Do not use a glass scraper.
Cooking compart- Hot soapy water or a vinegar solution:
ment, enamelled Clean with a dish cloth.
surfaces
Glass cover for the Hot soapy water:
oven light Clean with a dish cloth.
Seal Hot soapy water:
Do not remove. Clean with a dish cloth. Do not scour.
Accessories Hot soapy water:
Soak and clean with a dish cloth or
brush.

Removing and fitting the appliance door

You can remove the appliance door to clean it more
thoroughly.
ã=
Risk of injury!
The hinges of the appliance door may snap shut with great
force. Never reach into the hinges. After fitting the appliance
door, always close all hinge locks.
The oven door hinges each have a locking lever. When the
locking levers are closed (fig. A), the oven door is secured in
place. It cannot be removed. When the locking levers are open
in order to detach the oven door (Fig. B), the hinges are locked.
They cannot snap shut.
$
Removing the appliance door
Open the appliance door
1.
Lift up the locking levers on both sides.
2.
Close the appliance door until you can feel resistance at
3.
around 15° (in relation to the closed appliance door).
Grip the appliance door on either side with both hands.
4.
Risk of injury!
%
Close the appliance door a little further.
5.
Lift the door upwards and at an angle to remove it.
6.
Do not disassemble the appliance door.
Fitting the appliance door
Hold the appliance door at an angle.
1.
Insert both hinges, left and right, into the supports.
2.
Position the door so that the hinge grooves engage on both
3.
sides.
Open the appliance door.
4.
Fold in the locking levers on both sides.
5.
Close the appliance door.
6.
21