Disposal - Cornelius HS Manual Operation


o
Check the assemblies and components for damage before each use/before installing them. Do not
install assemblies or components that show visible signs of ageing.
Caution!
Component damage due to freezing liquids
Ambient temperatures that are below freezing will lead to the freezing of any water or cleaning agent
residue remaining inside the unit. This will lead to damage to internal components.
Before shipment, storage or relocation of the unit, the unit is to be cleaned and the cleaning solution is to
be fully drained from the unit.

Disposal

Disposal of the units must be carried out in compliance with the applicable local and/or national and
international regulations. Units must not be disposed of with household waste.
If the unit contains fuels or lubricants in liquid, paste-like or gaseous form, such as oil, grease, cooling
agents etc., such fuels or lubricants are to be collected using appropriate measures and disposed of in
compliance with the applicable local and/or national and international regulations. Such fuels or lubricants
must always be prevented from seeping into the ground, the sewage system and any bodies of water, and
must always be prevented from entering the atmosphere.
Cornelius Deutschland GmbH
Document no/ Dokumenten-Nr.: TD22022600ML
Version A, 11.05.2020, Index 0
Balance Carbonator / Balance Karbonator
Manual operation / Gebrauchsanweisung
Carbonator/Karbonator HS/HK
Seite 8