Recoil Housing - Polaris Trail Blazer Owner's Manual

MAINTENANCE AND LUBRICATION

Recoil Housing

1
To prevent possible engine damage,
always drain the recoil housing (1)
after operating the ATV in very wet
conditions. This should also be
done before storing the ATV.
Water will enter the recoil housing
if the starter handle is disengaged
from the rope guide when under
water. The recoil handle must be
behind the heat shield for it to seal
properly.
The drain screw is located at the bottom of the recoil housing. Use a
wrench to remove the screw. Be sure to reinstall the screw after
draining the housing.
93