Craftsman 358.798380 Operator's Manual page 8

....................................................................................... ASSEMBLY
ii jilL //
CHECK LIST
° Check all.fasteners. Make sure they are tight and there
are no loose parts.
• Make sure the blower tube isfirmly seated in the blower
outlet.
• If you are using the unit as a blower, make sure the inlet
cover is latched and the screw is fastened.
° In blower mode, check to insure the nozzle is securely
seated in the blower tube.
• If you are using your unit as a vacuum, make sure the
vaccum tubes are firmly connected, and positioned as
shown in the assembly illustrationswith the screw se-
curely fastened.
• Make sure the collection bag is correctly adjusted with
the shoulder strap on your left shoulder.
° Make sure your extension cord is marked with a suffix of
"W-A". ("W" in Canada).
-8-