Universal Security Instruments MI3050 Instructions Manual

Universal Security Instruments MI3050 Instructions Manual

Smoke & fire alarm with silence and alarm origination feature

Advertisement

SECURITY INSTRUMENTS, INC.
SMOKE & FIRE ALARM WITH SILENCE FEATURE
This smoke alarm uses an extremely small amount of a radioactive
element in the ionization chamber. Do not tamper with radioactive sealed
source or try to repair the smoke alarm yourself.
Smoke Alarm Limitations and Functions ................................. 2
Recommended Location of Alarms ......................................... 3
Avoid These Locations ........................................................... 4
Early Warning ......................................................................... 4
Installation Instructions ........................................................... 4
Locking/Tamper Feature ......................................................... 4
Mounting Instructions ............................................................. 5
Operation, Testing & Maintenance .......................................... 6
QUICK FIND
Cautions/Warnings ................................................................. 5
Battery Replacement .............................................................. 6
Develop and Practice a Plan of Escape .................................. 8
Operational Summary ............................................................. 9
Warranty ................................................................. Back Cover
MODEL MI3050, MI3050L
MODEL MI5050, MI5050L
AND ALARM ORIGINATION FEATURE
READ ALL INSTRUCTIONS

Table of Contents:

Alarm Originating Feature & Reset .................. 5
®
Page #

Advertisement

Table of Contents
loading

Summary of Contents for Universal Security Instruments MI3050

  • Page 1: Table Of Contents

    Alarm Originating Feature & Reset ... 5 ® Cautions/Warnings ... 5 Battery Replacement ... 6 Develop and Practice a Plan of Escape ... 8 Operational Summary ... 9 Warranty ... Back Cover MODEL MI3050, MI3050L MODEL MI5050, MI5050L READ ALL INSTRUCTIONS Table of Contents: Page #...
  • Page 2: Smoke Alarm Limitations And Functions

    SMOKE ALARM LIMITATIONS AND FUNCTIONS There are three basic smoke alarm types: IoPhic , Ionization and Photoelectric.   IoPhic is an ionization alarm containing a patent-pending Universal Smoke Sensing Technology.   IoPhic alarms are very effective at detecting fast flaming fires and also respond very quickly to slow smoldering fires - up to 87% faster than the maximum allowable alarm limit (UL217 Smoldering Smoke Test on 5/26/2010, Underwriters Laboratories Project #09CA38078).
  • Page 3: Recommended Location Of Alarms

    RECOMMENDED LOCATION OF ALARMS • Locate the first smoke alarm in the immediate area of the bedrooms. Try to protect the escape route as the bedrooms are usually farthest from an exit. If more than one sleeping area exists, locate additional smoke alarms in each sleeping area. If a hall is more than 40 feet (12 meters) long, install a smoke alarm at each end.
  • Page 4: Avoid These Locations

    • the garage – products of combustion are produced when you start your vehicle. • near appliances or areas where normal combustion regularly occurs (kitchens, near furnaces, gas hot water heaters). Use smoke alarms with photoelectric sensors or smoke alarms with Silence Feature for these areas.
  • Page 5: Mounting Instructions

    TO DEACTIVATE THE LOCKING FEATURES: To remove the smoke alarm for cleaning or servicing or to replace the battery, you must first remove the appropriate locking pin, if it has been installed. Use long nose pliers to pull the locking pin out of the hole. It is now possible to remove the smoke alarm or replace the battery.
  • Page 6: Battery Replacement

    NEVER use an open flame of any kind to test this smoke alarm. You might accidentally damage or set fire to the smoke alarm or to your home. The built-in test switch accurately tests the smoke alarm's operation as required by Underwriters Laboratories Inc. (UL). (UTHA) Sensitivity Indicating Means The sensitivity indicating means for this Smoke and Fire Alarm is the use of the analyzer for Smoke Detectors Model 501-A or 501-A/Bat Aerosol Generator Manufactured by Gemini Scientific Corp.,...
  • Page 7: Develop And Practice A Plan Of Escape

    DEVELOP AND PRACTICE A PLAN OF ESCAPE BASICS OF ESCAPE PLAN o Make a floor plan indicating all doors and windows and at least two escape routes from each room. Second story windows may need a rope or chain ladder. o Have a family meeting and discuss your escape plan, showing everyone what to do in case of fire.
  • Page 8: Operational Summary

    This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation.
  • Page 9: Warranty

    UNIVERSAL SECURITY INSTRUMENTS, INC./USI ELECTRIC, INC. ("USI") warrants your USI product to be free from defects in material and workmanship for a period of ten (10) years from the date of purchase. This warranty shall not apply to any batteries used in the product or to any damage which may be caused by such batteries.

This manual is also suitable for:

Mi5050lMi3050lMi5050

Table of Contents