Setting Timer Programming; Starting The Programme; Interrupting Programme; Terminate Programme - Bosch SMD4HAX48E User Manual

Table of Contents

Advertisement

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.
Press
⁠ .
1.
a "h:01" appears in the display.
Use
to set the required start
2.
time for the programme.
Press
⁠ .
3.
a This activates timer programming.
Tip: To deactivate timer program-
ming, press
repeatedly until "h:00"
appears in the display.

Starting the programme

Press
.
a The programme has ended when
the display shows "0h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 33
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
⁠ .
1.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
2.
gramme.

Terminate programme

To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
4 seconds.
Close the appliance door.
3.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
a The programme is cancelled and
ends after approx. 1 minute.

Switching off appliance

Please note the information on
1.
"Safe use" → Page 11.
Press
.
2.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
Basic operation en
for approx.
during the wash
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents