Philips Carin 522 User Manual page 39

Furthermore you have the opportunity to minimize the use of toll routes for
route planning:
Select the "Minimize toll routes" option, if you want to minimize the use of
toll routes.
•
If no toll-free roads are available for route planning, toll roads will be used.
Note: If the "Minimize toll routes" option is activated, route planning may take
longer than without this function activated. Therefore it is recommended to use
this function only if it is necessary.
Screen configuration
In this menu you can select a variety of colour combinations for screen display
and the information shown in the status line of the screen.
The Screen Settings menu offers you the following options:
Day colour
Select one out of nine colour combinations for the daytime display.
•
Optimized contrast is guaranteed by the options Blue, Green and Red.
This setting is active when the headlights are turned off.
Status line left
Select the kind of information shown in the lower left corner of the screen:
None: Status line left switched off.
Clock: Time display.
Date: Date display.
Remaining travel time: Time remaining until you arrive at the next via
point or the destination address (if no via points were entered) calculated
by CARiN.
Estimated time of arrival: Time you will arrive at the next via point or
destination calculated by CARiN.
Note: For calculating the estimated time of arrival and remaining travel time the
system uses an average travel speed. You can adjust this speed to your real
average speed by selecting the "System information / Speed correction" option.
Downloaded from www.nmis.nl
39
GB