Clean Wastewater Pump; Transportation, Storage And Disposal; Removing The Appliance - Siemens SX75ZX48CE User Manual

en Transportation, storage and disposal

Clean wastewater pump

Large remnants of food or foreign
bodies can block the waste water
pump. As soon as the rinsing water
no longer drains properly, the waste
water pump must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or frag-
ments of glass may block the waste
water pump and cause injury.
Remove any foreign bodies care-
▶
fully.
Disconnect the appliance from the
1.
power supply.
Remove the top and bottom bas-
2.
ket.
Remove the filter system.
3.
Scoop out any water.
4.
Use a sponge if necessary.
Prise off the pump cover using a
5.
spoon and grip it by the
crosspiece.
Lift the pump cover inwards at an
6.
angle and remove.
Remove any remnants of food and
7.
foreign bodies in the area of the
impeller.
Insert the pump cover
8.
down ⁠ .
58
a The pump cover clicks into posi-
9.
10.

Transportation, storage and disposal

Transportation, storage
and disposal
You can find out here how to prepare
Transportation, storage and disposal
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.

Removing the appliance

1.
2.
3.
4.
5.
6.
7.
and press
1
tion.
Install the filter system.
Insert the top and bottom basket.
Disconnect the appliance from the
power supply.
Turn off the water tap.
Detach the drainage connection.
Detach the drinking water connec-
tion.
Loosen any screws fastening the
appliance to cabinet parts.
Remove the base panel if fitted.
Pull the appliance out carefully,
along with the hose behind it.
2