Changing Basic Settings; Home Connect; Home Connect Quick Start - Siemens SX75ZX48CE User Manual

Basic setting
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows H:xx.
a The display shows
Press
4.
the display shows the required set-
ting.
Press or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Display text
rE:
⁠ .
repeatedly until
repeatedly until the
Selection
Start with
Y:ES
Confirm with
¡ → "Connecting the appliance to
WLAN home network (Wi-Fi)",
Page 40
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by Home Connect.
¡ Please also follow the instructions
in the Home Connect app.
Note: Please note the safety precau-
tions in this instruction manual and
make sure that they are also ob-
served when operating the appliance
via the Home Connect app.
→ "Safety", Page 4
Home Connect quick start
Connect your appliance to a mobile
device quickly and easily.
Installing app
Install the Home Connect app on
1.
your mobile device.
Start the app and set up access
2.
for Home Connect.
1
)
Home Connect en
Description
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
39