18 | Typical System Setup
TYPICAL SYSTEM SETUP
Fig. 14 Typical Setup
[1] Flex Duct Connection
[2] Low Voltage Control Connection
[3] Vibration Pad
[4] Ball Valves
[5] Solenoid Valve Slow Closing
[6] Condensate Drain Connection
[7] Drain Valves
[8] Hose Kits (optional)
[9] Pressure Tank (optional)
[10] P/T Ports (optional)
[11] Line Voltage Connection
[12] Electric Heater Line Voltage Disconnect
[13] Unit Line Voltage Disconnect
[14] Ground Loop Pumping Package
Typical Layout Illustration. See Fig. 9 for
Condensate Drain Connection.
8733826256 (2020/06)
Subject to change without prior notice
SM Split AH/AV Air Handler
For Reference Only.
A typical setup is shown for
illustration purposes only.
SM Split AH/AV Air Handler