Yamaha Clavinova CLP-955 Service Manual page 13

14. HP JACK Assembly
14-1 Remove the speaker grille assembly and the top board
(small) assembly. (See Procedure 1.)
14-2 Remove the key cover assembly. (See Procedure 7.)
14-3 Remove the panel assembly. (See Procedure 8.)
14-4 Remove the end block assembly (Left). (See Procedure 12.)
14-5 Remove the two (2) screws marked [85]. The HP Jack
assembly can then be removed. (Fig. 9)
15. HP Circuit Board
15-1 Remove the speaker grille assembly and the top board
(small) assembly. (See Procedure 1.)
15-2 Remove the key cover assembly. (See Procedure 7.)
15-3 Remove the panel assembly. (See Procedure 8.)
15-4 Remove the end block assembly (Left). (See Procedure 12.)
15-5 Remove the HP Jack assembly. (See Procedure 14.)
15-6 Remove the two (2) hex nuts marked [A]. The HP circuit
board can then be removed. (Fig. 9)
16. Keyboard Unit
16-1 Remove the speaker grille assembly and the top board
(small) assembly. (See Procedure 1.)
16-2 Remove the key cover assembly. (See Procedure 7.)
16-3 Remove the panel assembly. (See Procedure 8.)
16-4 Remove the end block assembly (L, R) (See Procedure 12.)
16-5 Remove the nine (9) screws marked [83] and the two (2)
screws marked [100]. The keyboard unit can then be
removed. (Fig. 9)
HP
[A] × 2
HP JACK Aseembly
[85] × 2
[83] × 9
Keyboard Unit
[83]: Pan Head Screw 5.0 × 25 MFZN2YPW (VV040700)
[85]: Bind Head Tapping Screw-1 3.5 × 12 MFZN2BL (EP030340)
[100]: Bind Head Tapping Screw-1 4.0× 14 MFZN2Y (EP040230)
(Fig. 9)
CLP-955
[100] × 2
13