Using Repeater Channels - Uniden UH400SX Owner's Manual

Uhf radio transceiver
Hide thumbs Also See for UH400SX:
Table of Contents

Advertisement

UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM
Operation

Using Repeater Channels

UHF CB repeaters are used to retransmit or relay your signal. Repeaters will extend the range
of your radio and overcome the shielding effect caused by solid obstructions. In normal Simplex
operation, your radio transmits on one particular frequency and receives on that same frequency.
If there is a barrier that partially blocks your transmitted signal, the probability of another radio
receiving the signal is very slim. Hills, tall buildings, metallic structures,...etc tend to act as a
screen between radios.
Standard Operation without the aid of a
Repeater Station.
The signal coming from your radio is received by the Repeater Station and the re-transmitted at
the same time on another channel. This operation is called "Duplexing".
For example,
CH01 on Duplex Mode will Receive on CH01 but Transmit on CH31
CH02 on Duplex Mode will Receive on CH02 but Transmit on CH32 etc...
If you transmit on CH01 Duplex mode, you are actually transmitting on CH31 the
repeater station down-coverts your signal and retransmits on CH01.
uh400sx, uh500sx, uh400sx-RM, uhSec1:21 Sec1:21
uh400sx, uh500sx, uh400sx-RM, uhSec1:21 Sec1:21
Operation with the aid of a Repeater
Station (Duplex).
21
1/2/08 1:31:27 PM
1/2/08 1:31:27 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uh400sx-rmUh500sxUh500sx-rm

Table of Contents