Use menu in FM mode
1
In FM mode, press
menu.
2
Turn SELECT knob to scroll through the
menu options:
•
[Scan setting]
•
[Audio setting]
•
[System settings]: adjust system
settings (see the Chapter "Use system
settings menu").
•
[Main menu]: access main menu (see
the Chapter "Use main menu").
3
To select an option, press SELECT knob.
4
Repeat steps 2 to 3 if any sub-option is
available under one option.
•
To return to the previous menu, press
.
[Scan setting]
•
[Strong stations only?]-[YES]: scan FM
radio stations with strong signals only.
•
[Strong stations only?]-[NO]: scan all
the available FM radio stations.
[Audio setting]
•
[Listen in Mono only?]-[YES]: select
mono broadcast.
•
[Listen in Mono only?]-[NO]: select
stereo broadcast.
Note
• If no button is pressed within 15 seconds, the
menu exits.
MENU to access FM
Show RDS information
RDS (Radio Data System) is a service that allows
FM stations to show additional information.
If you listen to an FM station with RDS signal, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press and hold
through the following information (if
available):
Station name
Radio text messages
Program type
Frequency
Date
repeatedly to scroll
EN
15