Page 2
IMPORTANT The DSS7805 additional handset will not operate unless it has been registered to your DSS7800 series main base unit. This manual describes how to set up and connect your new handset; for instructions on operating your new handset, refer to the owner's manual that supplied with your main base unit.
Page 3
Place the handset in the charging cradle with the keypad facing forward. • Use only the Uniden battery (BT-446) supplied with your phone. Replacement batteries are also available. Visit our web site at www.uniden.com.au or www.uniden.co.nz.
Page 4
AC adaptor easily. Charge the handset for 15-20 hours before using. Step 3: Register the Handset YOU NEED TO REGISTER THE DSS7805 TO THE MAIN BASE BEFORE USE! Be sure the handset battery is fully charged. With the main base in standby mode (i.e., not being used),...
Using Your Expansion Handset Now the your new handset is registered, it can perform all the same functions as the handsets originally included with your phone. With your new handset, you can • Transfer calls between handsets • Use two handsets as walkie-talkies in DirectLink mode •...
Page 7
(E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden, (F) Installed, programmed or serviced by anyone other than an authorized Uniden Repair Agent, or (G) Where the Serial Number label of the product has been removed or damaged beyond recognition.
Need help?
Do you have a question about the DSS7805 and is the answer not in the manual?
Questions and answers