Uniden BC 350C Owner's Manual page 16

Uniden scanner owner's manual bc350c
Hide thumbs Also See for BC 350C:
Table of Contents

Advertisement

UB317Z (BC350C) 0916
[WX] KEY
[CB] KEY
[SEARCH] KEY
[L/O] KEY
[BAND] KEY
9/16/03
12:42 PM
8 NOAA weather broadcasts and 2
Canadian marine weather broadcasts
frequencies are programmed into the
Weather (WX) bank. Press [WX] to
find your local weather channel.
40 CB channels are programmed into
the CB bank. Press [CB] to start
scanning CB channels.
Press [SEARCH] to start searching
active frequencies within the band
previously selected with [BAND].
Normally, the search continues from
the frequency where it left off in the
previous search.
Use [BAND] to select the band you
wish to search. When selecting a
band to search, release the key and
the scanner will automatically start
searching frequency of its band. (The
symbol L appears next to "SRCH" on
the display.) To search from a higher
frequency to a lower frequency, press
[DOWN]. (The symbol M is now
displayed next to "SRCH".
Press [L/O] to "lock out" or prevent
scanning of the displayed frequency.
[L/O] is active only during opened
squelch or in the Hold Mode.
Locked out channels can be
displayed on the screen by using the
[UP] or [DOWN] to manually scan
through the selected bank in Hold
Mode only. " L/O " appears on the
display to indicate that the channel is
locked out.
When you press [BAND], the upper
and lower limits of the band you are
searching are displayed for 3 seconds,
and then searching start.
Then the display returns to the
current frequency. Press [BAND]
again within 3 seconds to step up one
higher band.
12
Page 12

Advertisement

Table of Contents
loading

Table of Contents