Troubleshooting - Uniden BC 235XLT User Manual

If your
BC60XLT-1
following steps.
Problem
Scanner won't work.
Improper reception.
Scan won't stop.
Scan won't start.
Weather Scan won't work. 1. Adjust squelch threshold - refer to
If you still cannot get satisfactory results and want
additional information, or to return the unit for service,
please call or write the Uniden Parts and Service Division.
The address and phone number are listed in the Warranty
at the end of this manual, or call 1-800-297-1023.

Troubleshooting

is not performing properly, try the
1. Check the connections at both ends of
the AC Adapter.
2. Turn on the wall switch of your room. You
could be using an outlet controlled by the
wall switch.
3. Move the AC Adapter to another wall
outlet or replace the batteries.
1. Check the antenna connection or move
and reposition the antenna.
2. Move the scanner.
3. You may be in a remote area which could
require an optional multi-band antenna.
Check with your dealer or local
electronics store.
1. Adjust squelch threshold - refer to
page 10, Setting the Squelch .
2. Check the antenna connection.
3. Check to see if many of the channels are
locked out. If so, the scanner has less
chance of finding an active channel.
4. Review each channel's frequency to see
if it is still stored in memory and is correct.
5. It's possible that none of the programmed
frequencies are currently active.
1. Press the
2. Adjust the SQUELCH control.
3. Check to see if all channels are locked
out.
page 10, Setting the Squelch .
2. Check the antenna.
Suggestion
S
key again.
33