Basic Operation; Setting The Squelch - Uniden scanning radio Manual

Note: You can fold out the Front Cover to see the
Controls and Indicators while reading this Guide.

Setting the Squelch

To set the squelch, you must be in the Manual mode, and
you should not be receiving a signal on your scanner.
1. Press
not hear a signal.
Adjust VOLUME to a
2.
comfortable listening
level.
3. Think of the Squelch Control as a gate. Turn
SQUELCH fully counter-clockwise. This raises the
"Squelch Gate" so high that only very strong signals
can get through.
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS

Basic Operation

M
until you do
NOISE
15