Advertisement
6. Carefully tighten nuts of counter-plate in opposite diagonals, slight tightening (quarter a rotation) every time.
Final tightening moment should be approx. 0.3Nm (or about the force you would manually use with a screwdriver
without a lever)
7. Screw remaining 4 motherboard screws
8. Connect PCIe flex cable
9. Connect I3M flat cable
10. Reinstall FACE Module
11. Reinstall WiFi module
12. Reinstall disk cartridge
Operating Airtop
1. Close clamshell
2. Consult Airtop owner's manual getting started for connecting and powering Airtop
Hayetsira St. 17, Yokneam, Israel
Tel:
+972-48-290-100
Fax:
+972-48-325-251
www.compulab.co.il
Advertisement
Need help?
Do you have a question about the Airtop-C0 and is the answer not in the manual?
Questions and answers