ETC Setup Guide
DIN Rail Enclosures
Overview
This document covers the installation of the Large DIN Rail Enclosure (ETC Part 7180A1018),
Small Vertical DIN Rail Enclosure (ETC Part 7180A1019), and Small Horizontal DIN Rail Enclosure
(ETC Part 7180A1019-H).
Installation
It is recommended that you remove any electronics before drilling holes in the enclosure. Remove any metal
shavings from the enclosure before installing electronics and connecting power.
1:
Remove the four or eight screws securing the front cover of the DIN Rail Enclosure to access to the
mounting keyholes.
2:
Use the measurements provided in the following diagrams for mounting bolt locations.
3:
Secure the DIN Rail Enclosure to a fire resistant surface, such as drywall, masonry, or concrete, using
four bolts (mounting hardware not provided).
Large DIN Rail Enclosure,
back view
0.95"
(24 mm)
24.5"
(622 mm)
28"
(711 mm)
Corporate Headquarters
London, UK
Rome, IT
Holzkirchen, DE
Hong Kong
Web:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
7180M2270
14"
(356 mm)
350.92 mm
10.5"
266.70 mm
(267 mm)
1.75"
(44 mm)
Middleton, WI, USA
Tel +44 (0)20 8896 1000
Service: (UK)
Tel +39 (06) 32 111 683
Service: (UK)
Tel +49 (80 24) 47 00-0
Tel +852 2799 1220
Service: (Asia)
etcconnect.com
© 2017 Electronic Theatre Controls, Inc.
Rev D
Released 2017-11
Small Vertical DIN Rail Enclosure,
back view
0.95"
(24 mm)
11"
(279 mm)
14"
(356 mm)
Small Horizontal DIN Rail Enclosure,
back view
0.95"
(24 mm)
11"
(279 mm)
14"
(356 mm)
Tel +608 831 4116
Service: (Americas)
service@etceurope.com
service@etceurope.com
Service: (DE)
techserv-hoki@etcconnect.com
service@etcasia.com
14"
(356 mm)
10.5"
(267 mm)
1.75"
(44 mm)
14"
(356 mm)
10.5"
(267 mm)
1.75"
(44 mm)
service@etcconnect.com