Pull the rear end of the shelf
support away from the side wall
and remove it.
Install the shelf supports in the
The retaining pins on the tele‐
scopic runners must point to the
11.3 How to use: Pyrolytic cleaning
Clean the oven with pyrolytic cleaning.
There is a risk of burns.
If there are other appliances installed in the same cabinet, do not use them at the same
time as this function. It can cause damage to the oven.
Turn off the oven and wait
until it is cold.
Turn on the oven.
When the cleaning starts, the lamp is off and the cooling fan works at a higher speed.
- press to stop the cleaning before it is completed.
Do not use the oven until the door lock symbol disappears from the display.
Before the pyrolytic cleaning:
Remove all accessories except
for shelf supports and tele‐
CARE AND CLEANING
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
Select the cleaning mode.
1 h 30 min