English - Kenwood KCL95 Instructions Manual

Safety
Read these instructions carefully and retain for future reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety reasons, be replaced by
Kenwood or an authorised Kenwood repairer in order to avoid a hazard.
important note - electronic medical implants
Like all induction heating products, this appliance generates short-range
magnetic fields. If any user or person in close proximity has a pacemaker or
other active implants, please consult a doctor before use, concerning any
possible incompatibility to prevent any risk to health.
Switch off and unplug the appliance before fitting or removing tools/
attachments, after use and before cleaning.
Keep body parts, hair, jewellery and loose clothing away from moving parts
and fitted attachments.
Never put your fingers etc., into the hinge mechanism.
Never leave the appliance on unattended when in a non cooking mode.
When leaving the appliance unattended in the cooking mode, pay close
attention to the following:
ensure the instructions are followed with regards to temperatures and
maximum quantities to process;
make sure the unit and cord are positioned out of reach of children and away
from the edge of the work surface;
check the progress on a regular basis to ensure enough liquid is added and
food is not overcooking.
Never use a damaged appliance. Get it checked or repaired: see 'Service and
Customer Care'.
Never use an unauthorised attachment or more than one attachment at once.
Never exceed the maximum capacities and when using the induction heater
never exceed the 3 litre maximum fill level marked on the inside of the bowl.
When using an attachment, read the safety and usage instructions that come
with it.
Take care when lifting this appliance as it is heavy. Ensure the head is locked
and that the bowl, tools, outlet covers and cord are secure before lifting.
When moving the appliance always pick up by the pedestal base and mixer
head. Do not lift or carry the appliance by the bowl handle.
Never let the cord hang down where a child could grab it.
Never let the power unit, cord or plug get wet.
Be careful when handling or touching any part of the appliance when being
used in the cook mode or after cooking, IN PARTICULAR THE BOWL,
SPLASHGUARD AND TOOLS as they will remain HOT long after the appliance
has been switched off. Use the handles to remove and carry the bowl.
Use oven gloves when handling the hot bowl and hot mixing tools.
The symbol marked on the product indicates a surface that can become hot
during use.
Take care when removing bowl tools after extended use as they may get hot.
The underside of the bowl will remain hot long after the heating has stopped.
Use caution when handling and use the work surface protection mat when
placing the bowl on heat sensitive surfaces.
Be careful of steam escaping from the mixer bowl particularly when opening
the lid in the splashguard or when raising the mixer head.
If transferring hot food from the mixer to the blender, always allow the
ingredients to cool to room temperature before placing in the blender.
Only use the bowl and tools supplied with this appliance. Never use the bowl
with any other heat source.
Never operate the appliance in the cook mode with the bowl empty.
Never insert anything through the air vents.
When using this appliance ensure it is positioned on a level surface away from
the edge. Make sure it is at least 10 cm from walls and ensure that the vents
are not blocked. Do not position below overhanging cupboards.
For the correct and safe operation of the induction cooker ensure that the
bowl base and temperature sensors are clean and dry before cooking.
2