Download Print this page
Progress Lighting AirPro GULLIVER Installation Manual

Progress Lighting AirPro GULLIVER Installation Manual

Advertisement

Quick Links

GULLIVER Ceiling Fan Installation Manual
93099818 _A
P250012

Advertisement

loading
Need help?

Need help?

Do you have a question about the AirPro GULLIVER and is the answer not in the manual?

Questions and answers

Summary of Contents for Progress Lighting AirPro GULLIVER

  • Page 1 GULLIVER Ceiling Fan Installation Manual 93099818 _A P250012...
  • Page 2 Limited Lifetime Warranty Progress Lighting fan motors are warranted to the original purchaser to be free of electrical and/or mechanical defects for so D ate Pu r ch as ed long as the original purchaser owns the fan. Pull chain switches, reverse switches, capacitors and metal finishes are warranted to be free from defects in materials or workmanship for a period of 1 year from the date of purchase.
  • Page 3: Table Of Contents

    Safety Rules..................................... 1. Unpacking Your Fan ..................................2. Installing Your Fan ..................................3. Operating Your Transmitter ................................7. Care of Your Fan .................................... 9. Troubleshooting ....................................10. Specifications ....................................11. Ta ble o f C ontents...
  • Page 4: Safety Rules

    1. To reduce the risk of electric shock, insure electricity has been turned off To avoid personal injury or damage to the fan and other items, be at the circuit breaker or fuse box before beginning. cautious when working around or cleaning the fan. 2.
  • Page 5: Unpacking Your Fan 2

    Unpack your fan and check the contents. You should have the following items: 8. Loose parts bag containing: 1. Canopy assembly 5. Receiver a. Mounting hardware Wire nuts (6) 2. Ball/downrod assembly 6. Transmitter 3. Fixture assembly 7. 9V battery 4.
  • Page 6: Installing Your Fan

    SUPPORT OF LIGHTING FIXTURES MAY NOT BE ACCEPTABLE FOR FAN SUPPORT AND installation hanger bar as shown in Figure 4 MAY NEED TO BE REPLACED. CONSULT A (available at your Progress Lighting Retailer). QUALIFIED ELECTRICIAN IF IN DOUBT. 3. Installing Your Fan...
  • Page 7 Step 8. Install the Hanger bracket (A) on the Step 5. Insert the canopy (C) and metal cover Hanging the Fan outlet box by using the washer and screws are (D) through the downrod (B). (Fig.6) provided with the junction box. (Fig.7) REMEMBER to turn off the power.
  • Page 8 Step 1. Fan motor to Receiver Electrical and bracket ground wire to the mounting bracket. Make the Electric Current Limiter Connections: Connect the Secure the wire connection with a plastic nut Black wire from the fan to Black wire marked provided.
  • Page 9 An additional safety support is provided to Installing metal mesh and bulbs: prevent the fan from falling. Secure the safety Step 1. Insert the fan blades (M) onto the shaft (U), install lock nut (Q) onto the fan shaft after cable to the ceiling joist with screw and washer.
  • Page 11: Operating Your Transmitter

    UNCTIONS OF TRANSMITTER: : Turn off the ceiling fan. : Turn on the fan at high speed. : Turn on the fan at medium speed. : Turn on the fan at low speed. LIGHT : ON/OFF- Press and release immediately to turn on or off the light. DIMMER(If any)- Press and hold on to dimmer or brighten the light.
  • Page 12 Disassembling Your Fan The Reverse switch is located on the motor housing. Figure 14 Slide the switch to the Left for warm weather This fan comes with a pre-assembled blade and front operation. Slide the switch to the Right for cool guard for your easy installation.
  • Page 13: Care Of Your Fan

    Here are some suggestions to help you maintain your 3. Cover small scratches with a light application of shoe polish. 1. Because of the fan's natural movement, some There is no need to oil your fan. The motor has connections may become loose. Check the support permanently lubricated bearings.
  • Page 14: Troubleshooting 10

    Problem Solution 1. Check circuit fuses or breakers. Fan will not start. 2. Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off. 3. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency. 4.
  • Page 15: Specifications

    1099.56 34.41 Medium (11.27kg) (13.06kg) 39.05 1297.28 32.99 High These are approximate measures. They do not include Amps and Wattage used by the light kit. 2018 Progress Lighting, Inc. 701 Millennium Blvd., Greenville, SC 29607 All Rights Reserved 11. Specifications...