Equalizer Function - Makita DMR114 Instruction Manual

2. Press and hold the buzzer alarm button, the symbol
and the display hour will flash along with a beep.
3. During buzzer alarm symbol flashes, rotate the Tuning
control knob to select the hour and press the Tuning
control knob again to confirm hour setting. Then rotate
the Tuning control knob to select the minute and press
Tuning control knob to confirm minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends.
Press the Tuning control knob to confirm the setting.
Note:
There is no volume adjustment for buzzer alarm.
Stopping the alarm sound
To cancel a sounding alarm, press the Power button.
Disable the alarm setting
To disable the alarm setting before the alarm sounds,
press and hold the corresponding alarm button until alarm
symbol disappears on the display.
Snooze
1. When the alarm sounds, press any button other than
the Power button will silence the alarm for 5 minutes.
"SNOOZE" will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button to enter the menu
setting.
3. Rotate the Tuning control knob until "SNOOZE X"
appears on the display, then press the Tuning control
knob to enter the setting. Rotate the Tuning control
knob to adjust the silence time from 5, 10, 15 and 20
minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button.
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button to enter the Sleep
Timer setting. "SLEEP XX" will show on the display.
2. Keep holding the Power button and the Sleep Timer
options will start switching on the display. Stop until the
desired Sleep Timer setting appears on the display.
The setting will be saved and the LCD will return to
normal display.
3. Your radio will switch off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon will be
shown on the display indicating an active Sleep Timer.
4. To cancel the Sleep Timer function before the preset
time has elapsed, simply press the Power button to
turn the unit off manually.
Loudness
You can get compensation on lower and higher frequency
for your radio by adjusting the loudness function.
1. Press and hold the Menu/Info button to enter the menu
setting.
2. Rotate the Tuning control knob until "LOUD ON" or
"LOUD OFF" appears on the display. Press the Tuning
control knob to enter the setting.
3. Rotate the Tuning control knob to choose ON to turn
on the loudness function, then press the Tuning control
knob to confirm the setting.
4. To turn off the loudness function, select OFF and press
the Tuning control knob to confirm the setting.

Equalizer function

There are 7 kinds of color LED indicators around the
Tuning control knob to indicate different EQ modes.
1. Press the Power button to switch on your radio.
2. Press the EQ control button to enter the EQ setting
menu.
3. Rotate the Tuning control knob to select your required
mode. Then press the Tuning control knob to confirm
the selection.
EQ mode
FLAT
JAZZ
ROCK
CLASSIC
POP
NEWS
MY EQ
Set up My EQ profile
1. Press the EQ control button to enter the EQ setting menu.
2. Rotate the Tuning control knob to select "MY EQ".
Then press the Tuning control knob to enter the "BASS"
setting.
3. Rotate the Tuning control knob to select your required
bass level. Press the Tuning control knob to enter the
"MIDDLE" setting.
4. Rotate the Tuning control knob to select your required
middle level. Press the Tuning control knob to enter the
"TREBLE" setting.
5. Rotate the Tuning control knob to select your required
treble level. Press the Tuning control knob to confirm
the setting.
Note:
● When using the equalizer to emphasize the bass and
listening at high volume levels, it may cause sound
cracking and distortion. In this case, adjust the radio
volume appropriately.
11 ENGLISH
LED indicator
White
Blue
Red
Brown
Pink
Yellow
Green