Page 1
007 Remote Wrist Watch Advanced Digital Wrist Watch with Alarm and Remote Starter Control Capabilities. ULTRA Warning!! CARBON MONOXIDE MAY CAUSE SERIOUS INJURY, EVEN DEATH! The system must be placed into Service Mode before any service work is started on the It is the sole responsibility of the user to place the system in Service Mode vehicle.
1. Change from Mode to Mode SU 5-16 12:38 Real Time Mode MODE SU 5-16 18:88 Program Start Mode Press and release the MODE button to switch from Mode to Mode. MODE BUTTON Default Screen Mode Button Once Mode Button Twice Mode Button Three times Mode Button Four times Mode Button Five times...
2. Real Time Mode- How to Set Time and Date Page 3 2 seconds MODE RESET SU 12-16 SU 12-16 SU 12-16 12:38 18:38 12:38 ST.STP ST.STP 1. Press and hold the MODE button to enter the Real Time Setting Mode. 2.
Page 4
4. Alarm Mode Page 4 ST.STP 6:00 6:00 ST.STP 1. In real time mode, press the MODE button to enter the Alarm Mode. 2. Press the ST.STP button to set the alarm ON/OFF. When the Bell Icon is displayed, the alarm will sound at the preset time every day for 30 seconds.
5. Chronograph Mode 0:00 RESET 1. In real time mode, press the MODE button to enter the Chronograph Mode. 2. Press the ST.STP button to start chrono. To stop the chrono, press the ST.STP button. When the chrono is stopped press the RESET button so reset the time to zero When the chrono time is running, the “CHR”...
6. Timer Mode 00:20 1. In real time mode, press the MODE button 3 times to enter Timer Mode. 2. Press the ST.STP button to start the timer. To stop, press the ST.STP again. If the timer is stopped, press RESET to reset the time to the present value. When the timer is running, the TMR Icon flashes in all other modes with the exception of setting modes.
Page 7
7. Program Start Mode PS 6-20 12:38 1. In real time mode, press the MODE button 4 times to enter the Program Start mode. 2. Press the ST.STP button to change the ON/OFF function of the Program Start. When the “PRO” icon is ON, the engine will start and run at the preset time. The remote will beep three times to confirm starting of the engine.
Remote Control Mode For Vehicles Button 1 Arm/ Lock- Press and release. Panic Mode- Press and hold for 2 seconds. Light Button Program Start On MODE Button Light Button Button 1 Battery Replacement Change the battery when the Low battery icon is displayed on the LCD screen. Replace with Lithium CR2032 Battery.