Download Print this page

Ultra Start KEU-300 Series Owner's Manual

Advanced factory keyless upgrade security systems

Advertisement

Quick Links

OWNERS GUIDE
Covers All KEU-300 Series Advanced Factory
Keyless Upgrade Security Systems
www.ultrastarters.com
Technical Support: 866-698-5872 ext 0
support@ultrastarters.com
FCC/ID Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance
void the user's authority to operate this devise.

Advertisement

loading

Summary of Contents for Ultra Start KEU-300 Series

  • Page 1 OWNERS GUIDE Covers All KEU-300 Series Advanced Factory Keyless Upgrade Security Systems www.ultrastarters.com Technical Support: 866-698-5872 ext 0 support@ultrastarters.com FCC/ID Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 2: System Operation

    OWNER’S GUIDE Page 2 System Operation Arming 1. Press and release the LOCK button on the remote transmitter once. 2. The doors will lock and the system will confirm with one siren chirp and parking light flash. The LED will begin flashing after 5 seconds.
  • Page 3 REMOTE VEHICLE STARTER System Operation Passive Arming (optional) Turn the ignition to the “OFF” position and exit the vehicle. Upon closing the last door the LED will begin flashing rapidly to confirm the system is passively arming. After 30 seconds the siren will chirp and the parking lights will flash once to confirm the system has passively armed.
  • Page 4 OWNER’S GUIDE Page 4 System Operation Service Mode/ Emergency Override To enter: 1. Turn the ignition to the “ON” position. Ignition 2. Press and hold the Program Button for 5 seconds. The “On” system will respond with 5 siren chirps and the LED will turn “ON”...