Advertisement
725-HL
Designed for dispensing thicker fluids such as epoxies,
fluxes, sealants and wood glues. The 725-HL provides
relatively high flow for heavy-duty operation, without
maintenance or downtime. It features a piston design
for clean, positive shutoff and end-of-cycle snuff-back.
The System
Choosing the right tank is primarily based on two factors:
how much fluid you are dispensing and whether the fluid is
supplied in 1 pound or 1 liter bottles.
The air regulator is selected based on fluid viscosity. Watery
fluids require the 0-1.0 bar (0-15 psi) regulator, while
thicker fluids need the 0-100 psi (0-6.9 bar) regulator.
Since tanks are charged by plant air, we recommend the
five-micron filter regulator to filter contaminants. See
accessories, page 19, for details.
Model 615DTH:
1.0 liter tank
dispense tip
Tank reservoirs
Each tank is shipped complete
with constant bleed precision
air regulator and gauge, air hose,
liner and fluid feed tubing.
Model 626DTH:
5.0 liter tank
trigger grip
Key Features
N
End-of-cycle snuff-back
N
Ergonomic design
N
Positive shutoff
N
Simplified maintenance
Model
#615DTH
Tank body
cast aluminum
Inside diameter
9.7 cm (3.82")
Inside depth
1.75 cm (6.87")
Replaceable liner
polyethylene
Liner capacity
0.95 liter
Overall width
17.3 cm (6.81")
Overall height
35.6 cm (14.01") 40.6 cm (15.98")
Regulator & gauge
100 psi (6.9 bar)
Max. operating
pressure
100 psi (6.9 bar)
Bottle size accepted 1 pound
#615DTL
Regulator & gauge
15 psi (1.0 bar)
hanger not shown
#626DTH
cast aluminum
17.3 cm (6.81")
24.8 cm (9.75")
polyethylene
3.8 liters
28.3 cm (11.14")
100 psi (6.9 bar)
100 psi (6.9 bar)
1 liter
#626DTL
15 psi (1.0 bar)
9
Advertisement
