Advertisement
SERIES M700 POS KEYBOARD
Congratulations on your purchase of UTC RETAIL's innovative Series M700 POS Keyboard! The
Series M700 is a powerful, programmable, and feature-rich keyboard with the versatility to meet
any customer's needs. With it, you have a limitless selection of configurations and capabilities.
Fully UPOS compatible, the Series M700 features:
On-board micro-controller,
Indicator lights,
Enunciator,
3 track magnetic stripe reader (MSR)
Scanner port
This guide is designed to help you efficiently assemble UTC RETAIL's Series M700 POS
Keyboard.
Series M700 POS Keyboard Components
You will find the following components inside the Series M700 POS Keyboard Box:
Keyboard
Cables
Key(s)
Note: Please go to
Keyboard.
©UTC RETAIL. All rights reserved.
www.utcretail.com
to access the complete User's Guide for the M700 POS
Installation Guide
1
Advertisement
Table of Contents
Summary of Contents for Ultimate Technology POS Keyboard M700
-
Page 1: Installation Guide
SERIES M700 POS KEYBOARD Congratulations on your purchase of UTC RETAIL’s innovative Series M700 POS Keyboard! The Series M700 is a powerful, programmable, and feature-rich keyboard with the versatility to meet any customer’s needs. With it, you have a limitless selection of configurations and capabilities. Fully UPOS compatible, the Series M700 features: On-board micro-controller, Indicator lights,... - Page 2 11393108 Rev C Install the Keyboard 1) Unpack the keyboard and all supplied components 2) Route the PS2 keyboard cable from the keyboard install location to the keyboard port on the logic unit 3) Plug the PS2 cable into the keyboard port on the logic unit 4) Position keyboard to simplify port access (keyboard ports are located on the rear of the keyboard) 5) Plug the PS2 cable into the keyboard port on the keyboard Note: If other connections to the keyboard are required, refer to the Programming and User’s Guide...
Need help?
Do you have a question about the POS Keyboard M700 and is the answer not in the manual?
Questions and answers