Summary of Contents for Ultimate Chopper Food Chopper
- Page 1 IN S TRU C TI O N M A N UA L ©2002 Ultimate Chopper. All rights reserved. 40UC01IB01...
- Page 2 11. Keep hands and utensil away from the cutting blade while chopping food and out of container while blending to reduce the risk of severe injury to persons or damage to food chopper. A scraper may be used but only when the chopper or blender is not running.
- Page 3 U N P A C K I N G I N S T R U C T I O N S 1. Place the box containing your Ultimate Chopper ™ on a flat, sturdy surface before unpacking. Be sure the box is right side up. 2.
- Page 4 C L E A N I N G A N D M A I N T E N A N C E 1. Always unplug your Ultimate Chopper ™ from the electrical outlet before cleaning. Before first use and after every use, clean each part thoroughly. Periodically, check all parts before reassembly.
Need help?
Do you have a question about the Food Chopper and is the answer not in the manual?
Questions and answers
I have the blender that came with the chopper. I can't find any instructions with it.
The instructions for the Ultimate Chopper Food Chopper are:
1. Place the box on a flat, sturdy surface and ensure it is right side up.
2. Remove the top foam piece and lift the unit from the box.
3. Remove the Instruction Manual and Recipe Book.
4. Place the unit on a counter or table and read the instructions thoroughly.
5. Save the shipping cartons and foam blocks.
6. Wash all parts before first use according to the cleaning instructions.
Chopper Assembly and Operation:
1. Press the Chopping Bowl onto the Base Unit.
2. Place the Chopping Blade onto the center shaft until it clicks.
3. Align the blue dot on the Chopper Lid with the blue dot on the Base Unit.
4. Twist the Chopper Lid counter-clockwise until it clicks.
5. Plug the unit into an outlet.
6. Add food to the Chopping Bowl.
7. Press and hold the Start Lever to begin chopping.
8. Unplug and remove the lid by turning it clockwise after use.
Safety Notes:
- Handle blades carefully; they are sharp.
- Keep hands and utensils away from blades while in use.
- Use a scraper only when the unit is off.
- Do not place blades on the base without the bowl attached.
- Only authorized personnel should repair the unit.
This answer is automatically generated