3 Get started
Always follow the instructions in this chapter in
sequence.
Charge the built-in battery
The speaker is powered by a built-in
rechargeable battery.
Note
•
Fully charge the built-in battery before using.
Connect the USB cable between the micro-
USB socket on the speaker and a USB socket
on your computer or a charger.
EN
4
LED indicator (Power)
Flashing red
Solid red
Flashing red/green
alternatively
Solid green
Install batteries for the
microphone
1
2
5V
1.5 A
3
Being charged when
powered off
Fully charged when
powered off
Being charged when
powered on
Fully charged when
powered on
Open the battery compartment lid.
Install 2 AAA alkaline batteries (not
provided) with the correct polarity.
Close the battery compartment lid.
AAA x 2